Tenergy 9.6v 1600mAh NiMH Mini Crane Stock Battery
[K10C00][07638 / TEN11423 / NIMH9.6V1600N]Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
The Tenergy 9.6v 1600mAh NiMH Crane Stock Battery is designed specifically for use with a Crane Stock. The battery is pack is separated into two halves to fit the slots of the crane stock around the buffer tube. This battery will increase the rate of fire of your airsoft gun due to the higher voltage and its higher discharge rate.
Specifications:
Manufacturer: Tenergy
Voltage: 9.6v
Milliampere Hours: 1600mAh
Cell Type: Nickel-metal hydride (NiMH)
Connector Type: Mini
Recommended Fit: M4A1 hand guard, M733 hand guard, M4 Commando hand guard, MP5A5 hand guard, and MP5SD6 hand guard
Please Note:
This battery will fit in the G4, Combat Machine, G&G, VFC, KWA, and TSD crane stock. If you have any questions about which type of crane stock this battery will fit in please call us at (909) 869-0671.
Airsoft GI Battery Disclaimer:
Airsoft GI is not responsible for batteries that have been damaged as a result of improper operation, storage, misuse or abuse, accident or neglect, such as physical damage resulting from misuse; contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; use of the battery for commercial purposes or subjecting the battery to abnormal usage conditions, or other acts which are not the fault of Airsoft GI. Make sure you understand how your battery should be used and how long it should be charged. If you have any doubt regarding the operation, charging, or storage of your battery and/or charger, ask. A charging battery should not be left unattended and should be picked up periodically while charging to check for overheating. Do not charge batteries near flammable material. For more information regarding batteries please refer to the Frequently Asked Questions or the Airsoft GI Airsoft 101 Guide.
- Specifications
- Manufacturer: Tenergy
This is a pretty standard nunchuck battery and aside from crane stocks is very easy to use with regular hand guards as well because it has more freedom of movement. The only real downside to this battery is partially my fault, but they develop memory very easily. After about 15 minutes of charging I caused my charger to unplug and when I plugged it back in the battery was indicated to be full. Just be very wary when charging that it will develop a memory if you unplug it prematurely. However, I will note that even with the developed memory, it maintained a very long life.
Pros:
Very easy to use with crane stocks and front wired batteries alike as well as a very long life.
Cons:
The only real con is that it develops memory instantly, which I was led to believe was a non issue in NiMH batteries but this is 100% preventable.
This is a great battery for CQB and just about any field who doesn't mind a rapid shooting gun
Pros:
increases ROF
looks cool
nunchuck style
Cons:
sometimes its hard to get into my battery slot, but will vary from gun to gun
Had to get a replacement for my old battery. This one fired right up. A lifesaver. Thanks G.I.
Pros:
High Rate of Fire.
Fits easily in the gun (M4 Combat Machine)
Last Long
Cons:
None so far :)
|
Small tamiya
Spelling sucks will it fit a small Tamiya connector
2458 days ago Steven H
0
0
(I have this same question)
Staff Answer:
Yes, It has a small tamiya connector 2457 days ago 0
0
|
1 answers 1 asked |
|
what type of charger does this take? and will it fit in the lancer tatical lt-27b
idk I need answer
2537 days ago Preston W
0
0
(I have this same question)
Staff Answer:
This battery takes an NiMH smart charger and will fit into the LT-27B. 2459 days ago 0
0
|
1 answers 1 asked |
|
Will this battery fit the m4 from the starter pack?
Will it fit into m4 from starter pack
2632 days ago Michael L
0
0
(I have this same question)
Staff Answer:
Yes, it should fit it fine. 2433 days ago 0
0
|
1 answers 1 asked |
|
Will it fit?
This might be the dumbest question but will this fit the stock wired Beretta ARX 160 Elite?
2737 days ago Kanaan S
0
0
(I have this same question)
Staff Answer:
It would be a very tight fit. We recommend Lipo batteries for those rifles. 2420 days ago 0
0
|
1 answers 1 asked |
|
Will this fit in G&G TR4-18 M4?
Will this fit?
2764 days ago Stephen M
0
0
(I have this same question)
Staff Answer:
Yes it should 2419 days ago 0
0
|
1 answers 1 asked |
|
Will it fit in an ARX?
Will the battey fit in the stock of an ARX?
2867 days ago Kainin B
0
0
(I have this same question)
Staff Answer:
May be a tight fit, but since the battery goes into the hand guard it should fit. 2342 days ago 0
0
|
1 answers 1 asked |
|
Do you need to charge the battery on arrival or will it be able to use from the start?
Will the battery work out of package or do you need to charge it first
2962 days ago Jorge E
0
0
(I have this same question)
Staff Answer:
The battery will need to be charged before initial use. 2433 days ago 0
0
|
1 answers 1 asked |
|
Will this fit the connector in a Lancer Tactical M4 RIS-II? I bought that gun and this battery. The connectors do not fit.
Is there an adapter or another battery that would work?
3063 days ago Taigon W
0
0
(I have this same question)
Staff Answer:
If the connector on the gun is larger you will need this item. <a href=http://www.airsoftgi.com/product_info.php?products_id=589>http://www.airsoftgi.com/product_info.php?products_id=589</a> 3063 days ago 0
0
|
1 answers 1 asked |
|
Will it fit
Will this fit in the Krytac trident m4 crb with ease?
3476 days ago Jack S
0
0
(I have this same question)
Staff Answer:
It should 3476 days ago 1
0
|
1 answers 1 asked |
|
Will it fit?
Will it fit an Elite Force Next Gen. M4 CGB crane stock? I'm trying to find a good battery for this stock.
3569 days ago Ann G
0
0
(I have this same question)
Staff Answer:
Yes! This battery should fit! 3567 days ago 0
0
|
1 answers 1 asked |
|
Will this fit?
Will this fit in the stock of a VFC Scar- L?
3576 days ago Richard G
0
0
(I have this same question)
Staff Answer:
It should fit 3574 days ago 0
0
|
1 answers 1 asked |
|
Will this fit
Will this fit in an apex full metal R5 M10 crane stock and will the connector fit with the gun?
3580 days ago Mason R
0
0
(I have this same question)
Staff Answer:
Yes! This item is the ideal battery for this gun. 3579 days ago 0
0
|
1 answers 1 asked |
|
will it fit?
will this fit the king arms NYLON M4 CQB/R stock?
3600 days ago Justin P
0
0
(I have this same question)
Staff Answer:
Yes! The CQB/R is equipped with a crane stock, which this battery is specifically meant to fit. 3593 days ago 0
0
|
1 answers 1 asked |
|
will this fit?
will this fit in the silent death crane stock
3659 days ago John W
0
0
(I have this same question)
Staff Answer:
It should 3657 days ago 0
0
|
1 answers 1 asked |
|
will this fit?
I recently bought my gun and i want a higher rate of fire will this battery fit my gun thanks in advance
link to gun
http://www.airsoftgi.com/product_info.php?products_id=17867
3661 days ago Nicholas D
0
0
(I have this same question)
Staff Answer:
It should fit 3657 days ago 0
0
|
1 answers 1 asked |
|
stock
Will you get these back in stock soon if not how long does it take to get them from the distributor?
3664 days ago preston g
0
0
(I have this same question)
Staff Answer:
We are working to get them back in stock, It generally takes 2-6 weeks depending on the distributor 3664 days ago 0
0
|
1 answers 1 asked |
|
will this fit the Lancer Tactical Full Metal FAL Tactical AEG Airsoft Gun
i was thinking on buying tis gun but i was wondering if this battery would fit in its peq box please help me
3678 days ago Nicholas D
0
0
(I have this same question)
Staff Answer:
It should fit 3658 days ago 0
0
|
1 answers 1 asked |
|
Will this fit?
Will this fit a G&G CM16 MOD0 30th Anniversary
3700 days ago James B
0
0
(I have this same question)
Staff Answer:
It shouuld 3699 days ago 0
0
|
1 answers 1 asked |
|
Will this fit in a handguard of a G and G Cm16 Mod 0?
Currently tried running an 8.4v mini and doesnt fit. Woll this help in a very tight space for batteries?
3701 days ago Cheryl R
0
0
(I have this same question)
Staff Answer:
It should fit 3699 days ago 0
0
|
1 answers 1 asked |
|
We Scar-L
Will it fit the We Scar L
3705 days ago Hubert S
0
0
(I have this same question)
Staff Answer:
It should 3705 days ago 0
0
|
1 answers 1 asked |
|
will this work with the umarex hk416 cqb aeg
will it
3713 days ago Gian R
0
0
(I have this same question)
Staff Answer:
It should 3712 days ago 0
0
|
1 answers 1 asked |
|
Kwa g36c | 0 answers 1 asked |
|
will this fit in the ics l85 | 0 answers 1 asked |
|
charging amp? | 0 answers 1 asked |
|
KWA M4 A1 CQR Mod 1?
Will this battery fit into a KWA M4 A1 CQR Mod 1?
3769 days ago Kyle M
0
0
(I have this same question)
Yes
3533 days ago
Noah M
0
0
|
1 answers 3 asked |
|
Will this fit?
Will this fit the Airsoft GI FMG4 13" Next Gen. DMR Airsoft Gun?
3772 days ago Zachary D
1
0
(I have this same question)
Staff Answer:
It should 3769 days ago 0
0
|
1 answers 1 asked |
|
Will this Fit?
Will this battery fit in a magpul handguard?
3789 days ago Cooper L
0
0
(I have this same question)
Staff Answer:
It should 3789 days ago 0
0
|
1 answers 1 asked |
|
If I do not have a smart charger?
If I do not have a smart charger how long do I have to charge the battery?
Thanks
3790 days ago Lori P
0
0
(I have this same question)
Staff Answer:
2-3 hours 3790 days ago 0
0
|
1 answers 1 asked |
|
Classic Army m15a4
Will this fit in a classic army crane stock
3793 days ago wes b
0
0
(I have this same question)
Staff Answer:
It should 3791 days ago 0
0
|
1 answers 1 asked |
|
Will this fit in a buffer tube
I'm getting into airsoft and I want the g&g cm16 with the magpul like gear, and I want to get this battery (for both price and effectiveness.
3799 days ago wes b
0
0
(I have this same question)
Staff Answer:
It will not fit in a buffer tube 3798 days ago 0
0
|
1 answers 1 asked |
|
How long does the battery last?
How many hours could I use it with a full charge?
3867 days ago Cody M
0
0
(I have this same question)
1-2hours depending on how muck you use it
3770 days ago
Hunter B
0
0
|
1 answers 4 asked |
|
agm ?
would this fit into the agm stubby m4?
3893 days ago colby l
0
0
(I have this same question)
Staff Answer:
It should be able to fit. 3892 days ago 0
0
|
1 answers 1 asked |
|
Smart Charger
What smart charger do you recommend for this battery?
3934 days ago Brendan B
0
0
(I have this same question)
A $30 tenergy smart charger works great.
3833 days ago
Andy S
0
1
What smart charger do you recommend for this battery?
3934 days ago Brendan B
0
0
(I have this same question)
Staff Answer:
Airsoft is a hobby/sport where you get what you pay for. The better your smart charger, the longer your battery should last. I would recommend purchasing the best smart charger you can afford. 3934 days ago 0
0
|
2 answers 1 asked |
|
What size is the connector
mini or a large connector
3943 days ago Brit H
0
0
(I have this same question)
Staff Answer:
Mini tamiya. 3943 days ago 0
0
|
1 answers 1 asked |