Madbull VTAC 13" Extreme Battle Rail (Black)
[V04B06][14218 / MB VTAC 13]
OUT OF STOCK
Free Shipping for orders over $179 No Coupon needed
New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
The VTAC Extreme Battle Rail is designed by Viking Tactics (VTAC) and manufactured by Troy Industries. It is a one-piece, free floating rail system for AR15 rifles. The VTAC RIS' unique lightweight design helps to both reduce heat transfer and allow for a faster target acquisition, and Madbull has done an incredible job transitioning their impeccable quality over to the airsoft world. The Madbull VTAC Extreme Battle Rail boasts some great features that are just not found on other rail systems, such as their 3 bonus quick-attach rail sections, Troy Industries' famous state-of-the-art rotary locking system, and their unique, sleek design. Not only does this rail system work great, it is sure to give your airsoft rifle a distinct tactical advantage as well, providing a lightweight, ergonomic platform friendly to any user, beginner or experienced!
Specifications:
Manufacturer: Madbull / Troy Industries
Model: VTAC Extreme Battle Rail
Color: Black
Size: 13 Inch
Features:
- Officially licensed VTAC trademarks
- 3 Bonus quick-attach rail sections
- State of the art rotary locking system by Troy Industries
- Free floating design
- Proprietary patent pending one-piece design by Troy Industries
- Blocked gas pipe tunnel to prevent mis-use on real guns
Please Note:
- This Rail system is designed specifically for airsoft purposes and WILL NOT work on real firearms.
- Specifications
- Manufacturer: Madbull Airsoft
see 4 reviews
| Write a Review
verified buyer
J. MCCOURT
|
2014-01-29
Product Information:
Picked up one of these not too long ago, and let me say it's one heck of a rail. As soon as i took it out of the box I couldnt believe how nice and sturdy it was. though it did not come with instructions, it was rather easy to install and only took about 5 mins. Its super lightweight, while giving you a lot of room for rails. If you was to give your gun a DMR look, but don't want a lot of weight, this is the rail for you.
Pros:
Leightweight
Looks great
easy to install
comes with rails
Cons:
A little Pricey
Nothing else at all!
Picked up one of these not too long ago, and let me say it's one heck of a rail. As soon as i took it out of the box I couldnt believe how nice and sturdy it was. though it did not come with instructions, it was rather easy to install and only took about 5 mins. Its super lightweight, while giving you a lot of room for rails. If you was to give your gun a DMR look, but don't want a lot of weight, this is the rail for you.
Pros:
Leightweight
Looks great
easy to install
comes with rails
Cons:
A little Pricey
Nothing else at all!
K. BONDS-DAVIS
|
2014-02-01
Product Information:
I have this version in Flat Dark Earth therefore I didn't buy it from ASGI but hopefully they can stock that color of this rail. I used this rail for my Honey Badger build so there were a few specs that I didn't know that I needed to know. With that said the inner diameter of the rail is ~35mm; I have a Madbull Gemtech Blackside in Tan and it is a tight fit inside the rail and the metal handguard scratched up the suppressor but because it is inside the rail it does not show. If you want to fit the rail segments on the handguard with a suppressor on the inside of the rail I would suggest a 30mm suppressor that should be sufficient.
Pros:
- Full metal (CNC Aluminum)
- Slim profile
- Modular rail segments
- The rail doubles as a wrench to tighten / loosen the barrel nut
- Has a stopper to stop the rail from freely turning along with the tightening screws
Cons:
- Small inner diameter
- Hard to install rail segments towards the center of the handguard
- Unable to fit any mock gas system except for an M16 length, still not able to fit a gas tube.
I have this version in Flat Dark Earth therefore I didn't buy it from ASGI but hopefully they can stock that color of this rail. I used this rail for my Honey Badger build so there were a few specs that I didn't know that I needed to know. With that said the inner diameter of the rail is ~35mm; I have a Madbull Gemtech Blackside in Tan and it is a tight fit inside the rail and the metal handguard scratched up the suppressor but because it is inside the rail it does not show. If you want to fit the rail segments on the handguard with a suppressor on the inside of the rail I would suggest a 30mm suppressor that should be sufficient.
Pros:
- Full metal (CNC Aluminum)
- Slim profile
- Modular rail segments
- The rail doubles as a wrench to tighten / loosen the barrel nut
- Has a stopper to stop the rail from freely turning along with the tightening screws
Cons:
- Small inner diameter
- Hard to install rail segments towards the center of the handguard
- Unable to fit any mock gas system except for an M16 length, still not able to fit a gas tube.
verified buyer
J. PALASZ
|
2014-03-11
Product Information:
First of all i say good riddance to my stock G&G Gr15 CQB metal ris and stupid triangle cause this took its place, and couldnt be any happier..Death to the triangle..
Pros:
SUPER lightweight for a long rail.
Scary easy to install just a lot of common sense.
Rail segments are very robust.
Cons:
when attaching the rail segments for this long of a rail can be rather hard to get the screw threaded, but with some patience its accomplishable..
other than above this product is totally tacticool..I HIGHLY recommend this for your weapon to stand out..
First of all i say good riddance to my stock G&G Gr15 CQB metal ris and stupid triangle cause this took its place, and couldnt be any happier..Death to the triangle..
Pros:
SUPER lightweight for a long rail.
Scary easy to install just a lot of common sense.
Rail segments are very robust.
Cons:
when attaching the rail segments for this long of a rail can be rather hard to get the screw threaded, but with some patience its accomplishable..
other than above this product is totally tacticool..I HIGHLY recommend this for your weapon to stand out..
|
|
Will this fit on a G&G cm16?
Ps I've already removed the front sight
3501 days ago Jordan H
0
0
(I have this same question)
Staff Answer:
It should fit. 3497 days ago 0
0
|
1 answers 1 asked |
|
|
Compatibility
Will this fit a VFC OEM threaded receiver?
3611 days ago Jordan H
0
0
(I have this same question)
Staff Answer:
It should 3611 days ago 0
0
|
1 answers 1 asked |
|
|
KWA Sr7 Devgru | 0 answers 1 asked |
|
|
Suppressor
Will the Madbull OSS Back Pressure Regulator 2 Barrel Extension fit inside this RIS?
3842 days ago Kyle C
0
0
(I have this same question)
Staff Answer:
No 3841 days ago 0
0
|
1 answers 2 asked |
|
|
Where can one purchase the rail sections for this? | 0 answers 2 asked |
|
|
LM4?
Will this rail fit the KWA lm4c platform ?
3876 days ago Mason T
0
0
(I have this same question)
Staff Answer:
It should 3876 days ago 2
0
|
1 answers 1 asked |
|
|
M4 fitment?
Will this fit my King Arms M4?
3904 days ago Tyler E
0
0
(I have this same question)
Staff Answer:
Yes 3904 days ago 0
0
|
1 answers 1 asked |
|
|
Fit?
Will this Fit On an Fm-g4
3907 days ago Nancy C
0
0
(I have this same question)
Staff Answer:
Yes it will. 3904 days ago 0
0
|
1 answers 1 asked |
|
|
Replacements
Where can I find replacement screws for the two holes that pinch the rail together?
3948 days ago Kenneth W
0
0
(I have this same question)
Go to you're local hardware store and play around in the bolt are you will find it
3876 days ago
Mason T
0
0
|
1 answers 1 asked |
|
|
silencer
could a standard size silencer fit inside of this rail system?
3953 days ago Noah s
0
0
(I have this same question)
Staff Answer:
No, it will not fit 3953 days ago 0
0
|
1 answers 1 asked |
|
|
Will this fit?
can i install this on my m4 right away without any additional pieces?
3953 days ago Noah s
0
0
(I have this same question)
Staff Answer:
It depends on your brand of M4 3953 days ago 0
0
|
1 answers 1 asked |
|
|
rail
does this rail system come with everything needed to mount it straight to the gun?
3953 days ago Noah s
0
0
(I have this same question)
Staff Answer:
It should come with everything needed 3953 days ago 0
0
|
1 answers 1 asked |
|
|
fit?
would this rail system fit onto a g and g combat machine raider, would i need any specific tools to do so?
3953 days ago Noah s
0
0
(I have this same question)
Staff Answer:
You would need a different outer barrel as the front sight is not removable on the combat machines 3953 days ago 0
0
|
1 answers 1 asked |
|
|
M28?
Will this fit an echo 1 m28 barrel extension ?
3956 days ago Michael A
0
0
(I have this same question)
Staff Answer:
No it will not fit 3956 days ago 0
0
|
1 answers 1 asked |
|
|
Does this rail come with all necessary mounting hardware
Its pictured but i only want to be sure. And i mean hardware to mount it to the gun itself
4027 days ago Thomas D
0
0
(I have this same question)
Staff Answer:
It should include the screws needed to mount the rails. 4025 days ago 0
0
|
1 answers 1 asked |
Search Tags: RIS RAS Mad Bull Licensed Upgrade M4 M16 Rail Full Metal Rails System Modular V Tac V-TAC Viking Tactical 13 Inch Inches
People who bought this item also purchased:
