Madbull Noveske 10" M4/M16 RIS (Black)
[X05D09][03707 / MB FFHG 10 / NRH02]
OUT OF STOCK
Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Description:
This Madbull Noveske 10" Rail Unit is a licensed RIS from Noveske Rifleworks. Madbull has always been a company dedicated to excellence, which is why they take the extra step to make the best quality built and looking airsoft accessories available. If you want a unique looking RIS then look no further than the Madbull Noveske.
- Specifications
- Manufacturer: Madbull Airsoft
see 2 reviews
| Write a Review
verified buyer
verified buyer
verified buyer
B. GREENE
|
2008-07-07
this is a great ris!! i got this for my ca m15 spc and it fits totaly flush with the upper reciver even lighter then the CA ris. gives it the hk 416 look and its a real steel replica noveske.com.
verified buyer
J. ARVAY
|
2009-03-06
Product Information:
I installed this rail on my KWA M4 for the mid-lenght RIS look, but it was a little tricky to get on.
For those of you who have yet to install this rail..
-The rail doesn't have room for a fuse inside of it, so if your gun is front wired and has a fuse, you're going to have to remove that and just replace the fuse with 16 or 18 gauge wire.
-Please! (this is the mistake I made) Pay attention to getting the holes on the replacement delta-ring lined up, and don't just tighten it. I forgot to do this and had a heck of a time unscrewing the delta-ring a little to get it lined up.
-You may want to use a small amount of powdered graphite or oil as a lubricant to help you get the delta ring on.
Pros:
-Very sturdy. This thing is a rock-solid unit.
-Finish looks good.
-It's a pretty skinny rail, not like the Mad Bull "Dragon Fire" rail at all. It's maybe about 2.5 inches to 3 inches wide from the bottom to the top, and about 2-2.5 inches wide.
-Fits KWA guns! (you may have to use a hex wrench, or something that does the same job, to get enough torque to turn it near the end.)
-It lines up perfectly with the rail on my M4's upper. This isn't some cheaply machined and cheaply spec'd knock-off rail at all.
-
Cons:
-None.
I installed this rail on my KWA M4 for the mid-lenght RIS look, but it was a little tricky to get on.
For those of you who have yet to install this rail..
-The rail doesn't have room for a fuse inside of it, so if your gun is front wired and has a fuse, you're going to have to remove that and just replace the fuse with 16 or 18 gauge wire.
-Please! (this is the mistake I made) Pay attention to getting the holes on the replacement delta-ring lined up, and don't just tighten it. I forgot to do this and had a heck of a time unscrewing the delta-ring a little to get it lined up.
-You may want to use a small amount of powdered graphite or oil as a lubricant to help you get the delta ring on.
Pros:
-Very sturdy. This thing is a rock-solid unit.
-Finish looks good.
-It's a pretty skinny rail, not like the Mad Bull "Dragon Fire" rail at all. It's maybe about 2.5 inches to 3 inches wide from the bottom to the top, and about 2-2.5 inches wide.
-Fits KWA guns! (you may have to use a hex wrench, or something that does the same job, to get enough torque to turn it near the end.)
-It lines up perfectly with the rail on my M4's upper. This isn't some cheaply machined and cheaply spec'd knock-off rail at all.
-
Cons:
-None.
|
|
lm4c
will this fit on an lm4c
3473 days ago robert l
0
0
(I have this same question)
Staff Answer:
It should 3472 days ago 0
0
|
1 answers 1 asked |
|
|
Will this fit on a vfc body, specifically a pr-15?
It has a 14.5 inch barrel with the flip up sight on the putter barrel. I would be removing the flip up sight.
3529 days ago Patricia B
0
0
(I have this same question)
Staff Answer:
Yes 3472 days ago 0
0
|
1 answers 1 asked |
|
|
fit
will this fit my Krytac CRB
3543 days ago Talisen S
0
0
(I have this same question)
Staff Answer:
It should 3541 days ago 0
0
|
1 answers 1 asked |
|
|
WIll this fit on Tippmann's M4 Carbine | 0 answers 1 asked |
|
|
CAA/king arms?
does this fit my CAA/king arms m4?
3679 days ago Christian S
0
0
(I have this same question)
Staff Answer:
It should 3673 days ago 0
0
|
1 answers 1 asked |
|
|
fit
will this fit the combat machine m4-a1 carbine?
3686 days ago William W
0
0
(I have this same question)
Staff Answer:
You will need to remove the front iron sight 3682 days ago 0
0
|
1 answers 1 asked |
|
|
fit
I have a kwa sr10, can i still fit my gas tube into the upper receiver with this ris?
3807 days ago Joshua R
0
0
(I have this same question)
Staff Answer:
It should be able to 3807 days ago 0
0
|
1 answers 1 asked |
|
|
Magpul Full Metal MOE 11.5" CQB
Will the rail fit this gun without the G&P barrel nut?
3813 days ago Michael N
0
0
(I have this same question)
Staff Answer:
If the gun is a G&P you will need the G&P barrel nut 3810 days ago 0
0
|
1 answers 1 asked |
|
|
lm4
Will it fit and does it come with barrel nut
3823 days ago Colby M
0
0
(I have this same question)
Staff Answer:
It should fit and come with the barrel nut 3820 days ago 0
0
|
1 answers 1 asked |
|
|
KWA SR10
I was looking to see if I still need the original delta ring from my rail system or does this come with a nut or something of the sort like the madbull troy RIS systems use to create a flush look to the upper receiver.
3829 days ago Joshua R
0
0
(I have this same question)
Staff Answer:
This does not require the Delta Ring 3828 days ago 0
0
|
1 answers 1 asked |
|
|
Weight | 0 answers 1 asked |
|
|
Installation
Can you install this for me at the walk in store?
3838 days ago Angeluz G
0
0
(I have this same question)
Staff Answer:
There will be a labor fee. But it's best if you just show up to the store and just ask our staff over there. 3835 days ago 0
0
|
1 answers 1 asked |
|
|
Fit
Will this fit a kwa sr10
3838 days ago Angeluz G
0
0
(I have this same question)
Staff Answer:
It should 3838 days ago 0
0
|
1 answers 1 asked |
|
|
elite force 4crs
Will it be a direct bolt on, or will it require modification?
3842 days ago Eddymir L
0
0
(I have this same question)
Staff Answer:
Modification may be required 3842 days ago 0
0
|
1 answers 1 asked |
|
|
will it fit on a G&G GR16 combat machine?
i just wanted to know because my M4 isnt the type with a delta ring
3844 days ago Greg S
0
0
(I have this same question)
Staff Answer:
It will most likely not fit if you have a 14.5 inch barrel with a front triangle sight 3844 days ago 0
0
|
1 answers 1 asked |
|
|
Can you install this for me?
I want this rail on my kwa cqr mod 2 because I want the "honey badger" look. Could you guys install it if I buy it? Thanks.
3872 days ago Jeremy W
0
0
(I have this same question)
Staff Answer:
We could with out tune up / repair service, however there is no suppressor, aside from the Gemtech Outback that will fit inside of that rail system 3872 days ago 0
0
|
1 answers 1 asked |
|
|
What is the weight of this RAS | 0 answers 2 asked |
|
|
will this fit a g&p woc gbb?
I want this rail because it seems like I still have my mock gas tube vs. The mad bull dd 9" lite rail .
3910 days ago Noel M
0
0
(I have this same question)
Staff Answer:
It will not, you will need and adapter for any G&P gun. 3908 days ago 0
0
|
1 answers 1 asked |
|
|
fit on combat machine
will this rail fit on a combat machine shorty
3935 days ago Jane L
0
0
(I have this same question)
Staff Answer:
It should fit. 3935 days ago 0
0
|
1 answers 2 asked |
|
|
Room for imitation has tube?
Does this have room for an imitation gas tube found on a G&G Top Tech Gun?
3939 days ago Russ L
0
0
(I have this same question)
Staff Answer:
This should have room for that. 3939 days ago 0
0
|
1 answers 1 asked |
|
|
Whats the inner diameter of this rail?
im hoping i could put a mock suppressor inside, so if theres a specific one that happens to be a perfect fit that would help too.
3939 days ago Gregory M
0
0
(I have this same question)
I have read online that it will fit a silencer with a diameter of 30mm. The inner diameter of the rail is something like 1.3"
3927 days ago
Alexander B
0
0
|
1 answers 2 asked |
|
|
Will this fit?
Can it fit on the KWA LM4 GBBR?
3984 days ago Logan F
0
0
(I have this same question)
Staff Answer:
Yes, this should work. 3984 days ago 0
0
|
1 answers 1 asked |
|
|
How sturdy is this rail?
From what I have heard, this rail bolts on to a new ring that is tightened onto the upper receiver. If this is the case, then what is keeping this rail from just twisting itself off or un-aligning? I have seen many G4's with them, which is what I have, and want to make sure it is reliable. Thank you
3985 days ago Lucas s
0
0
(I have this same question)
Staff Answer:
Usually a dab of locktite can fix any twisting issues, but these rails will usually fit pretty tightly. 3985 days ago 0
0
|
1 answers 1 asked |
|
|
Will this rail fit on a KWA CQR mod 1?
i really want a great sturdy rail platform for my KWA mod 1 and I want this one. Please tell me if it will fit my gun.
3989 days ago Will A
0
0
(I have this same question)
Staff Answer:
This rail should be able to fit on the CQR. You will need to remove the delta ring however, which may require the delta ring removal tool. 3989 days ago 0
0
|
1 answers 1 asked |
Search Tags: External Accessories RAS Metal Hand Guard Licensed Rail M4 M16
