MAG M4/M16 190 rd. AEG Mid Capacity Magazine - 5 Pack (Black)
[U14C01][06159 / MAG-MAG M4 MTL]
OUT OF STOCK
New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
This magazine is recommended for use with the A&K, Echo 1, JG, Tokyo Marui, Classic Army, VFC, ICS, G&G and G&P M4/M16 series AEGs, it may work with other brands AEG but cannot be guaranteed by Airsoft GI.
Specifications:
Manufacturer: MAG
Magazine Capacity: 190 rounds
Package Includes: 5 Magazines
Please Note:
These magazines will may not function with the original style KWA M4/M16 series.
- Specifications
- Manufacturer: MAG
see 6 reviews
| Write a Review
verified buyer
verified buyer
verified buyer
P. NEEF
|
2010-04-20
Product Information:
Purchased these to replace the crappy high cap that came with me G&G. The fit great with only small amount of wobble. I love the full metal construction. I have no hesitation in dropping them or tossing them to a team mate. Was a little worry about the cost/value ratio, but after using them for a few months and getting used to them I am very glad I bought them. Like previously stated it is not a good idea to try to get the full 190 into them. I tryed and found that not only was it hard to get them all in but the first 30 shots didn't feed right and cause a huge air leak (reduced the guns range to about 10 feet). I now load them to about 140-150 and they shoot perfect.
Pros:
Full metal construction
Good fit with almost all M4/M16 riffles
easy to load
Reliably holds/feeds 140-150 rds
Cons:
Doesn't reliably feed all 190rds
cost
Purchased these to replace the crappy high cap that came with me G&G. The fit great with only small amount of wobble. I love the full metal construction. I have no hesitation in dropping them or tossing them to a team mate. Was a little worry about the cost/value ratio, but after using them for a few months and getting used to them I am very glad I bought them. Like previously stated it is not a good idea to try to get the full 190 into them. I tryed and found that not only was it hard to get them all in but the first 30 shots didn't feed right and cause a huge air leak (reduced the guns range to about 10 feet). I now load them to about 140-150 and they shoot perfect.
Pros:
Full metal construction
Good fit with almost all M4/M16 riffles
easy to load
Reliably holds/feeds 140-150 rds
Cons:
Doesn't reliably feed all 190rds
cost
C. BELL
|
2014-01-01
Product Information:
Got these mags for Christmas and was very excited. However when i tried to use them with my ARES TAR-21 and my JG STAR Dragon they would simply fall out of both/not fight securely for some reason. I've been airsofting for around 5 years so I don't think it was user error. Mine might have been a defective batch since everyone else's reviews seem to be great :/
Pros:
Great metal exterior
Looks pretty
Cons:
Fall right out of the magwell/don't fit securely
Might have been defective
Got these mags for Christmas and was very excited. However when i tried to use them with my ARES TAR-21 and my JG STAR Dragon they would simply fall out of both/not fight securely for some reason. I've been airsofting for around 5 years so I don't think it was user error. Mine might have been a defective batch since everyone else's reviews seem to be great :/
Pros:
Great metal exterior
Looks pretty
Cons:
Fall right out of the magwell/don't fit securely
Might have been defective
verified buyer
P. DOYLE
|
2014-02-17
Product Information:
I've had these magazines for about 6-7 months and have used them many time. I run two Classic Army M15A4s and a KWA KM4 SR10. I tend to experience misfeeds for the 5-10 rounds with all three of my guns. This gets frustrating at times, especially if you'd rather not give away your position after reloading. If I only load 60-70 rounds the misfeeds are usually eliminated, but anytime I try to load more than 100rds, i get the misfeeds. Its very annoying and frustrating. BBs either roll out of the barrel, doubleshoot, or fire a very short distance. I have the misfeed problem no matter which of the 5 magazines I use and not matter which gun I use. I plan to switch to using the 120 rd KWA polimer Midcaps, as they have worked flawlessly in my KWA SR10.
Once you get past the opening mis-feeds (first 5-10 rds) these mags work great. After using these I no longer like using Hi-capacity magazines.
Pros:
Quiet (no rattle like a Hi-cap)
After first 5-10 rds they work great.
Cons:
First 5-10 rd misfeeds.
Expensive.
I've had these magazines for about 6-7 months and have used them many time. I run two Classic Army M15A4s and a KWA KM4 SR10. I tend to experience misfeeds for the 5-10 rounds with all three of my guns. This gets frustrating at times, especially if you'd rather not give away your position after reloading. If I only load 60-70 rounds the misfeeds are usually eliminated, but anytime I try to load more than 100rds, i get the misfeeds. Its very annoying and frustrating. BBs either roll out of the barrel, doubleshoot, or fire a very short distance. I have the misfeed problem no matter which of the 5 magazines I use and not matter which gun I use. I plan to switch to using the 120 rd KWA polimer Midcaps, as they have worked flawlessly in my KWA SR10.
Once you get past the opening mis-feeds (first 5-10 rds) these mags work great. After using these I no longer like using Hi-capacity magazines.
Pros:
Quiet (no rattle like a Hi-cap)
After first 5-10 rds they work great.
Cons:
First 5-10 rd misfeeds.
Expensive.
|
|
Will it fit
Will these mags fit an Elite Force Next Gen. CQB?
3507 days ago Ann G
0
0
(I have this same question)
Staff Answer:
Yes they should. 3492 days ago 0
0
|
1 answers 1 asked |
|
|
fmg4
I have had a difficult time finding a good midcap mag to work in my fmg4. Most mags are too loose and can be pulled out by gently moving the mags left/right, forward/backward. Would these work will in my fmg4?
3596 days ago Joe C
0
0
(I have this same question)
Staff Answer:
They should work 3594 days ago 0
0
|
1 answers 2 asked |
|
|
GI G4-A3
Will this fit the Airsoft GI G4-A3 airsoft gun?
3645 days ago Andrew Z
0
0
(I have this same question)
Staff Answer:
They should fit 3643 days ago 0
0
|
1 answers 1 asked |
|
|
PDR C
Will this fit the magpull PDR-C?
3695 days ago Kara C
0
0
(I have this same question)
Staff Answer:
They should 3692 days ago 0
0
|
1 answers 1 asked |
|
|
Fit
Will it fit a KM4 SR10 2GX
3795 days ago Michael H
0
0
(I have this same question)
Staff Answer:
They should fit 3795 days ago 0
0
|
1 answers 1 asked |
|
|
Will these fit the colt M4A1 licensed by CYMA?
Will these fit the Cybergun Full Metal Colt M4A1 Carbine Airsoft Gun Licensed by CYMA?
3856 days ago William C
0
0
(I have this same question)
Staff Answer:
They should work as that gun is an M4 style 3856 days ago 0
0
|
1 answers 1 asked |
|
|
Will it fit in Socom gear diablo 7
Hyu
3889 days ago tyler b
0
0
(I have this same question)
Staff Answer:
It should fit. 3888 days ago 0
0
|
1 answers 1 asked |
|
|
Will it fit good like the 130 mag for kwa
Is there any winding u have to do?
3890 days ago pao x
0
0
(I have this same question)
Staff Answer:
This should fit. There is no winding needed for this magazine. 3888 days ago 0
0
|
1 answers 1 asked |
|
|
Will it fit a lancer tactical?
I am curious if these magazines will fit in a Lancer Tactical M4 S-System
3952 days ago Andrew M
0
0
(I have this same question)
Staff Answer:
These magazines should fit a Lancer Tactical M4 S-System. 3951 days ago 0
0
|
1 answers 1 asked |
Search Tags: Mil Sim Gun Field M4 M16 Scar Mag Clip Box Set Mid Cap Spring Cleaning mid cap midcap medium capacity aeg automatic electric gun airsoft mag magazine clip
