KJW 1911 26 rd. Gas Pistol Single Stack Magazine (Black)
[F13F00][02532 / GBB-609-MAG / V944025]
OUT OF STOCK
Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
This magazine is designed for KJW 1911 Single Stack Ver. 3, but it is also compatible with the Tokyo Marui 1911. This magazine is recommended to be used with Green gas, Red gas may work but is not recommended and cannot be guaranteed by Airsoft GI.
Specifications:
Manufacturer: KJW
Capacity: 26
Design: Green gas
Please Note:
This magazine is not compatible with the Version 1 KJW 1911, please double check which version pistol you have before purchasing this item.
- Specifications
- Manufacturer: KJ Works
see 2 reviews
| Write a Review
verified buyer
verified buyer
verified buyer
M. LEMING
|
2009-04-17
Product Information:
A fine magazine, although I am only able to get about 17-19 rounds on one charge of gas, and I have tried green gas and propane. On a warm day occasionally I am able to get all 22rds out, but this has happened very rarely. If you have the money, buy the CO2 mags, they are much more reliable and you can get about 64rds on one CO2 cartridge.
Pros:
-holds about 22rds, which is a lot for a 1911 replica
-realistic size
-full metal
Cons:
-only a fraction on the full mag capacity can be fired
-Mag does not hold enough gas to fire all the bbs
-loads the bbs in the middle of the mag (which I find very weird), and the follower does not lock down, so you have to hold it with your finger. KJW gives you a tool to hold the follower down, but I find that it pops off very easily, spraying bbs everywhere.
A fine magazine, although I am only able to get about 17-19 rounds on one charge of gas, and I have tried green gas and propane. On a warm day occasionally I am able to get all 22rds out, but this has happened very rarely. If you have the money, buy the CO2 mags, they are much more reliable and you can get about 64rds on one CO2 cartridge.
Pros:
-holds about 22rds, which is a lot for a 1911 replica
-realistic size
-full metal
Cons:
-only a fraction on the full mag capacity can be fired
-Mag does not hold enough gas to fire all the bbs
-loads the bbs in the middle of the mag (which I find very weird), and the follower does not lock down, so you have to hold it with your finger. KJW gives you a tool to hold the follower down, but I find that it pops off very easily, spraying bbs everywhere.
verified buyer
M. LEMING
|
2014-01-08
Product Information:
I ordered two of these back in '09 and the o-rings were crap. Also the plastic tab you're supposed to hold on the follower when you're loading BBs snapped on both of them, making it that much more of a pain to load, and also the follower will just poke up straight out of the magazine now that the tab is gone. I salvaged parts from the mags and a CO2 mag that I bought to make ONE working magazine out of the THREE that I ordered. I hope they've changed, for your sake.
Pros:
It holds BBs and Gas (usually)
It fits the gun you ordered, hopefully.
Easy to take apart and service (and you will most likely need to)
Cons:
Plastic is cheap and will break on you.
Leaked like crazy.
Not quite big enough to fire off all 22 of the BBs it can hold. I only load 15 and that works fine.
I ordered two of these back in '09 and the o-rings were crap. Also the plastic tab you're supposed to hold on the follower when you're loading BBs snapped on both of them, making it that much more of a pain to load, and also the follower will just poke up straight out of the magazine now that the tab is gone. I salvaged parts from the mags and a CO2 mag that I bought to make ONE working magazine out of the THREE that I ordered. I hope they've changed, for your sake.
Pros:
It holds BBs and Gas (usually)
It fits the gun you ordered, hopefully.
Easy to take apart and service (and you will most likely need to)
Cons:
Plastic is cheap and will break on you.
Leaked like crazy.
Not quite big enough to fire off all 22 of the BBs it can hold. I only load 15 and that works fine.
|
|
Does it work with WE?
Does it work with a WE M1911 A1?
2341 days ago Tom T
0
0
(I have this same question)
Staff Answer:
KJW and WE 1911 single stack magazines are not cross-compatible, these will not work in a WE gun. 2336 days ago 0
0
|
1 answers 1 asked |
|
|
Fit? | 0 answers 1 asked |
|
|
Fit?
Will this fit in the licensed m1911 A1?
3599 days ago Preston L
0
0
(I have this same question)
Staff Answer:
If its a KJW 3598 days ago 1
0
|
1 answers 2 asked |
Search Tags: Stock Replacement OEM MilSim GBB Gas Blow Back Pistol M1911 Mag Clip M1911
