JG M4 M130 Complete AEG Gearbox (Rear Wired)
[W11D06][03602 / JG M4 GEAR BOX]
ADD TO CART
Also available at:
CA Walk In Store
New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Description:
This is a complete Version 2 Gearbox from JG. It is wired to the rear, designed for the M4, and with the M130 Spring rating should shoot around 400 FPS if properly installed. Don't worry about upgrading piece by piece, JG has done all the work for you in one complete package. By getting the complete gearbox you've rid yourself of worrying about parts compatibility and function. This entire gearbox is made from and assembled by the same company, so you know they did it right.
Please Note:
Airsoft GI recommends professional installation for this product. Motor is not included
- Specifications
- Manufacturer: JG
- Color: Black
- Material: Metal / Polycarbonate
- Package Includes: One (1) Complete Gearbox
see 8 reviews
| Write a Review
verified buyer
verified buyer
D. SCHAIBLE
|
2014-01-28
Product Information:
I bought this for My D-Boys PDW after it started acting up. The Shipping took 8 days with ground shipping. It was a little tight in my gun but it does not affect how it performance at all. just tricky to get the selector plate right. It was easy for me and i'm a big boy with meaty hands. Mine didn't come with a selector plate but I didn't think much of it since it didn't say it did. luckily my old one fit perfectly and after losing and finding the bead that goes under the selector switch a couple times I got it in there and now I run it with a high torque motor and a 7.4 LiPo. I have yet to see any thing bad from it except if i pull the trigger too far i hear a click and it wont fire until pull it again. Couple wraps of electrical tape and i'm good.
Pros:
Doesn't show signs of wear with a LiPo and high torque motor
Easy to install
Shoots straight
It hurts even at 30 yards
Cons:
Selector plate didn't come with it
a little tight in my PDW
can't pull the trigger super hard
I bought this for My D-Boys PDW after it started acting up. The Shipping took 8 days with ground shipping. It was a little tight in my gun but it does not affect how it performance at all. just tricky to get the selector plate right. It was easy for me and i'm a big boy with meaty hands. Mine didn't come with a selector plate but I didn't think much of it since it didn't say it did. luckily my old one fit perfectly and after losing and finding the bead that goes under the selector switch a couple times I got it in there and now I run it with a high torque motor and a 7.4 LiPo. I have yet to see any thing bad from it except if i pull the trigger too far i hear a click and it wont fire until pull it again. Couple wraps of electrical tape and i'm good.
Pros:
Doesn't show signs of wear with a LiPo and high torque motor
Easy to install
Shoots straight
It hurts even at 30 yards
Cons:
Selector plate didn't come with it
a little tight in my PDW
can't pull the trigger super hard
verified buyer
G. JACOBS
|
2018-10-14
Product Information:
Jg m130 I ordered it and was easiest all by myself it fit into my system no problem took it out to the field at .25 it was registering at 375 it we registering that 375 it home out strong on the field enjoyed it the only change that I made was going to a 9.6 battery
Pros:
Wasn't that expensive
Easy to install
Cons:
I have none at the moment but will be back to check those soon as I have a first problem
Jg m130 I ordered it and was easiest all by myself it fit into my system no problem took it out to the field at .25 it was registering at 375 it we registering that 375 it home out strong on the field enjoyed it the only change that I made was going to a 9.6 battery
Pros:
Wasn't that expensive
Easy to install
Cons:
I have none at the moment but will be back to check those soon as I have a first problem
verified buyer
G. JACOBS
|
2018-11-11
Product Information:
, update gearbox is real good had a 1:30 spring I made a few calculations that was wrong I .28 they were shooting hi three hundreds
Pros:
And shooting.28 shooting in the high 300 so I can only imagine if I drop it down to 25 what are we get
Cons:
Only problem I have with it is that as loud gearbox the shoe quieter than the competition on the field
, update gearbox is real good had a 1:30 spring I made a few calculations that was wrong I .28 they were shooting hi three hundreds
Pros:
And shooting.28 shooting in the high 300 so I can only imagine if I drop it down to 25 what are we get
Cons:
Only problem I have with it is that as loud gearbox the shoe quieter than the competition on the field
|
|
Will this drop in a Classic Army Scarab?
Need a drop in
2247 days ago William H
0
0
(I have this same question)
Staff Answer:
No it will not fit the Classic Army Scarab. Your best bet is to get an OEM scarab gearbox. 2246 days ago 0
0
|
1 answers 1 asked |
|
|
Compatibility
Will this fit a G&G cm16 Mod0
2487 days ago Jaden L
0
0
(I have this same question)
Staff Answer:
This should work, but there may be some fitment issues between different companies. 2457 days ago 0
0
|
1 answers 1 asked |
|
|
Do I have to buy a HopUp for this?
???
2892 days ago Jared H
0
0
(I have this same question)
Staff Answer:
The hop up is not included with this. 2430 days ago 0
0
|
1 answers 1 asked |
|
|
what type of battery connectors does it have
????
3833 days ago Jaxon E
0
0
(I have this same question)
Staff Answer:
It does not have a battery connector 3831 days ago 0
0
|
1 answers 1 asked |
|
|
what type of motor does this need
(Short or long)
3833 days ago Jaxon E
0
0
(I have this same question)
Staff Answer:
It depends on what body you are dropping it into 3831 days ago 0
0
|
1 answers 1 asked |
Search Tags: Tokyo Marui ICS JG SRC Cyma Echo1 VFC G&P AGM King arms G&G Upgrade Mech Box Shell Version 2
People who bought this item also purchased:
