G&G Combat Machine CM16 SRXL Keymod M4 Carbine AEG Airsoft Rifle (Red)
[R06C00][21188 / GNG-EGC-16PSXLRNBNCM / EGC-16P-SXL-RNB-NCM]New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
The G&G Combat Machine CM16 SR-XL AEG Airsoft Gun is a great addition for your arsenal. The airsoft gun features a 12 inch full metal keymod rail system that is known for its light weight compared to most rail systems. The new Combat Machine receiver is designed with an ambidextrous magazine release button and charging handle for left hand users. The ergonomic six position crane stock holds the battery compartment and has a new design rubber pad for extra comfort on shouldering the airsoft gun.
The CM16 SR-XL has an installed pre-programmed MOSFET chip that is able to stop batteries such as a Li-Po from over discharging and becoming damaged. The MOSFET is also programmable to shoot from full auto to 3-round burst. Additionally, G&G has installed an electronic trigger unit that increases response and assists in preventing trigger burns or locks in rapid semi-auto firing. Look no further for a high quality airsoft gun that fits your needs.
Specifications:
Manufacturer: G&G
Model: Combat Machine CM16 SR-XL
Muzzle Velocity: 380-390 FPS
Magazine Capacity: 300rds
Package Includes: Gun, Magazine
Features:
- Red External Parts
- 12" Full Metal Keymod Rail
- Pre-installed MOSFET & Electronic Trigger Unit
- 90 Day Manufacturer Warranty
Please Note:
- Optic is NOT included.
- Battery and charger are NOT included.
- Specifications
- Manufacturer: G&G
- Magazine Capacity: 300rds
- Fire Mode: Safe - Semi - Auto
- Color: Red
- Material: Polymer / Metal
- Package Includes: Gun, Magazine
- Outer Barrel Length: 14.0in
- Stock Type: G&G Retractable
- Handguard: G&G 12.0in Keymod
- Sight: Iron Sights
- Cylinder Head Type: Version 2
- Cylinder Type: Aluminum
- Piston Head Type: Ported Polycarbonate
- Piston Type: Polycarbonate
- Air Nozzle Type: M4 / M16
- Tappet Plate Type: Version 2
- Spring Type: M110
- Spring Guide Type: Version 2
- Bushing Size: 8mm
- Bushing Type: Brass
- Gear Set Type: Torque Standard Ratio
- Switch/Wire Type: G&G Electronic Trigger Unit
- Selector Plate Type: G&G Version 2
- Cut Off Lever Type: Version 2
- Anti Reverse Latch Type: Version 2
- Motor Type: Original Torque
- Hop Up Type: G&G One Piece
- Inner Barrel Length: 363mm
- Sector Gear Clip: No
- Fuse: Yes
- MOSFET: Yes
- Connector: Small Tamiya
- Warranty: 90 Day G&G Warranty
- External
- Primary Build Material: Polymer
- Internal
- Gear Box: Version 2
When I first got this i opened the box and it was beautiful it was like love at first sight lol. It stir about 100 yards probably or more it was shooting straight and fast. it has a lot of space for keymod rail adapters and a really cool top rail that was full metal (the rails). And I got a Callen 9.6 nunchuck battery and it was a really really tight fit in the stock. And the stock it really roomy
Pros:
Cool rails
It shoots far and hard
Metal rails
The grip is really comfy
Flip up front and rear iron sights
The stock was really good looking
Cons:
Little stock wobble(very little)
Very little mag wobble but it's ok (for me)
Flip up front and rear sights paint comes of fast when flipping them up and down
My charging handle is really easy to pull back. It got caught on my best a few times and the dust cover came down in battle.
Overall you should get this it's really easy to fix the mag and stock wobble and you might not even us the flip up sight much so you should get this gun for sure
GUN worked great not one problem with it I have sense done some upgrade to it!
Pros:
Great Quality gun
Mosfet was great
Stock range great
stock fire rate grea
Cons:
Con
Stock After about 3 game I notice the stock was cutting at where the mosfet and cable to the gearbox meet(Should reinforce this area)
AIRSOFT GI COMPLAINT THERE INFO ON THIS GUN IS WRONG
The inner barrel Length is not 363!!! its 330
I noticed this after buying a new 363 Tightbore R-hop barrel!
G&G Combat Machine CM16 SRXL KeyMod M4 Carbine AEG Airsoft Rifle ( Black )
Pros:
Everything about it is amazing
Cons:
No cleaning rod (theres a place for it and its just not there) probably a manufacturing mistake).
Always out of stock
|
Can you use a valley energy lipo 11.1 battery in it?
Just wondering.
2506 days ago Frankie M
0
0
(I have this same question)
Staff Answer:
You can, but we recommend sticking with a 7.4v lipo. 2426 days ago 0
0
|
1 answers 1 asked |
|
Is it normal for gun to warm up while using ?
Is it normal for gun to heat up while using?
2652 days ago Josiah S
0
0
(I have this same question)
Staff Answer:
The motor grip will start to warm up after the gun has been shooting for a long period of time in one sitting. Try to stay away from outputting too much at once. 2391 days ago 0
0
|
1 answers 1 asked |
|
Any way to put a suppressor on this?
How would I put a suppressor on mine ?
2652 days ago Josiah S
0
0
(I have this same question)
Staff Answer:
Most airsoft guns will have 14mm counter clockwise threading. 2410 days ago 0
0
|
1 answers 1 asked |
|
What kind of bb will work best for the gun
I am getting the gun and would like to know
2698 days ago Cj R
0
0
(I have this same question)
Staff Answer:
I recommend using .20g-.25g weight BBs. 2407 days ago 0
0
|
1 answers 1 asked |
|
Gearbox
Does this have the new G&G Gen. 2 Gearbox?
2732 days ago Jonathan Y
0
0
(I have this same question)
Staff Answer:
It does not come with it. 2386 days ago 0
0
|
1 answers 1 asked |
|
Supressor
What kind of supressor works with the flash hider threads
2789 days ago Joe R
0
0
(I have this same question)
Staff Answer:
Most airsoft guns will have 14mm counter clockwise threading. 2424 days ago 0
0
|
1 answers 1 asked |
|
Mock suppressor
Would the gk16 mock suppressor fit on this orange tip?
2805 days ago Trey W
0
0
(I have this same question)
Staff Answer:
Unless it is specifically for this gun model, it will probably not fit. 2332 days ago 0
0
|
1 answers 1 asked |
|
Li-Po Ready? | 0 answers 1 asked |
|
magazine
can i use m4 magazines in this weapon
3279 days ago Luis F
0
0
(I have this same question)
Staff Answer:
AEG m4 magazines 3278 days ago 0
0
|
1 answers 1 asked |
|
rail segments? | 0 answers 1 asked |
|
Vertical grips
How would I put on a vertical grip for this.
3299 days ago Collin C
0
0
(I have this same question)
you can buy keymod rails which attach to the 12'' barrel. They are fairly cheap and work well providing a good rail system. Look them up on youtube
3284 days ago
Blake T
0
0
|
1 answers 1 asked |
|
Battery
What type of battery goes with this sweet gun, and where does it go.
3300 days ago Collin C
0
0
(I have this same question)
Staff Answer:
Most players prefer using a nunchuck 9.6v NiMH 1600 mAh battery. 3299 days ago 0
0
|
1 answers 1 asked |
Other Great Deals and Accessories:
Select the item from the Drop Down Menu and click add.