Classic Army Skirmish ECS CA4A1 EC2 M4 RIS Carbine AEG Airsoft Rifle (Black)
[R06C00][33709 / CA-ENF001P]New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
The M4 RIS EC2 Skirmish is Classic Army's entry level carbine. Utilizing Classic Army's nylon fiber allows for a lighter weight platform while ensuring playable durability in a cost efficient package. The M4 RIS EC2 Skirmish features a high rate of fire along with a 300rd high capacity magazine so you can put more BBs on target faster than you can count. It also features a 9.75" quad rail system for attachments of lights, lasers, bipod, or forward grip. Front and rear flip up sights are included with plenty of rail space for you to mount a scope. It has a quicker change spring system so that you can quickly and easily upgrade or downgrade your spring once you remove the gearbox from the receiver.
Internally, the gun has a 9mm bushing gearbox, a brand-new electronic control system, inline mosfet protected trigger contacts, 6.03mm tightbore barrel, and a quicker change spring system. Program the electronic control system to shoot at 3 to 5 round burst. Also, the ECS has motor protection and low battery detection to help protect the airsoft gun in the long run. It will shoot 330-350 fps using 0.20g BBs and 900-1000 rpm using a 9.6V battery. This model now comes with a three prong flash hider that has threads on it to attach a QD mock suppressor. Additionally, there is a flat trigger preinstalled that allows for a quicker trigger pull and response from the airsoft gun.Specifications:
Manufacturer: Classic Army
Model: CA4A1 EC2 RIS Carbine
Muzzle Velocity: 330-350 FPS
Magazine Capacity: 300rds
Color: Black
Package Includes: Gun, Magazine, 2x Rail Covers, Vertical Grip
Warranty Length: 90 Days
Warranty Handler: Classic Army (Warranty Policy)
Features:
- Programmable Electronic Control System (ECS) - 3 / 5-round Burst, Motor Protection, & Low Battery Detection
- Nylon Fiber Construction
- 9.75" Quad Rail System
- 6.03mm Inner Barrel
- Mosfet Protected Trigger Contacts
- Three Prong Flash Hider w/ QD Threads
- Straight Trigger
Please Note:
- Battery and charger are NOT included.
- Specifications
- Manufacturer: Classic Army
- Muzzle Velocity: 330-350 FPS
- Magazine Capacity: 300 rds
- Fire Mode: Programable
- Color: Black
- Material: Nylon Fiber
- Battery Pack: Included
- Package Includes: Gun, Magazine, 2x Rail Covers, Vertical Grip
- Overall Length Extended: 850mm
- Overall Length Retracted: 770mm
- Weight Empty: 2550g
- Piston Type: Heat Treated Polymer
- Bushing Size: 9mm
- Gear Set Type: Steel 18:1 gear ratio
- Motor Type: Proline Series 23k Motor
- Inner Barrel Length: 363mm
- MOSFET: Yes
- Connector: Small Tamiya
- Quick Spring Change: Yes
- Warranty: 90 Day Manufacturer Warranty
- Internal
- Gear Box: Version 2
This gun by far is the best starter gun in my opinion. It comes with a built-in computer chip that basically makes the gun dummy proof. The gun never locks up, and I have tried to constantly but it just wont lock up. The mouse like trigger is amazing since I can feather it. When putting in a 7.4v it rips. I would recommend this over the G&G, Lancer, etc. For me I got the version that didn't have a flat trigger nor the new flash hider but I'm not complaining.
Pros:
Its made of a nylon fiber that is almost indestructible.
The bottom rail is metal for M203 etc.
The ECS grip is super comfortable.
Multiple ways to program gun, I personally like semi-3 round burst.
No place to wobble, except stock.
Replica troy iron sights.
Great range out of the box with .25 BB.
Wired to deans with adapter.
Comes with 25K motor.
New blue hop-up works like a charm, better than prowin.
Cons:
The body is proprietary, not even the metal nemesis bodies work on it.
Would like it to shoot a bit hotter(closer to the 370's) Just upgrade spring.
Vertical grip and batter it comes with is gimmicky. (Got a 7.4v)
Flash hider is basically welded onto the barrel.
Screw that is on the stock always comes loose. (Just got VFC QRS stock)
Mag it comes with wobbles way too much. (Just get Lonex flashmags)
Honestly, though I have put alot of cons in this gun I still give it 5 stars, this should be your first choice if you're looking for a starter gun.
Got this gun in a mystery box. Was a little upset at first, since the mystery box was more expensive than the actual rifle. However, it's not a bad gun. The nylon fiber body feels super cheap, but the gearbox is strong and the electronic trigger makes up for it. I got this gun up to 27 rps with some upgraded gears and motor. Be careful about changing gears though, the OEM gears have a magnet that works with the ECS. Find a small (5mm diameter) rare earth magnet that you can slot into the sector gear and it works perfectly with the ECS.
Pros:
Electronic trigger
good internals
3/5 round burst
quick change spring
Cons:
cheap feeling nylon fiber body
foregrip sucks
charging handle does not lock back
Awesome gun! Had mine for a few years now and its still going strong!
Pros:
Cons:
|
Metal
Are the rails metal?
2201 days ago kaci w
0
0
(I have this same question)
Staff Answer:
No, the rails are polymer. 2200 days ago 0
0
Are the rails metal?
2201 days ago kaci w
0
0
(I have this same question)
Staff Answer:
No, the rails are polymer. 2200 days ago 0
0
|
2 answers 1 asked |
|
Spring upgrade?
What spring could I use to upgrade its fps to 400 or as high as the gearbox can handle?
2414 days ago Teagan B
0
0
(I have this same question)
Staff Answer:
To get to about 400fps, you would need an M120 or M125 spring 2413 days ago 0
0
|
1 answers 1 asked |
|
Charger
What kind of charger does this come with? (Smart charger, etc.) More specifically, does it stop charging when battery is fully charged?
2477 days ago Jared H
0
0
(I have this same question)
Staff Answer:
Standard wall charger. These will not detect when the battery is full. 2433 days ago 0
0
|
1 answers 1 asked |
|
What batterys does it use?
Does nunchuck batterys fit in this gun?
2489 days ago Rico T
0
0
(I have this same question)
Staff Answer:
Most nunchuck batteries should fit into the crane stock. 2479 days ago 0
0
|
1 answers 1 asked |
|
Threading
What is the threading size and direction on the barrel for suppressors/related accessories?
2491 days ago Jared H
0
0
(I have this same question)
Staff Answer:
Most airsoft guns should have 14mm counter clockwise threading. 2479 days ago 0
0
|
1 answers 1 asked |
|
11.1 lipo
Can this hold and handle a 11.1 lipo?
2508 days ago Mason c
0
0
(I have this same question)
Staff Answer:
yes, this has a mosfet for 11.1V batteries 2429 days ago 0
0
|
1 answers 1 asked |
|
Can I upgrade this gun
Can I upgrade the gun and if so what parts are compatible
2511 days ago Ryan F
0
0
(I have this same question)
Staff Answer:
Standard V2 parts will work. The gearset should not be changed as it has a magnet in it that allows the ECS to function 2428 days ago 0
0
Can I upgrade the gun and if so what parts are compatible
2511 days ago Ryan F
0
0
(I have this same question)
Staff Answer:
The gun is upgradeable and takes standard version 2 parts 2428 days ago 0
0
|
2 answers 1 asked |
|
Fire Rate?
It says "Program the electronic control system to shoot at 3 to 5 round burst." Does this mean that it can only shoot at 3 and 5 round bursts, or is it just another options besides from full auto?
2512 days ago Ashoua X
0
0
(I have this same question)
Staff Answer:
It is an additional option that replaces either your semi-auto setting or full auto setting. 2429 days ago 0
0
|
1 answers 1 asked |