CYMA CM032A SOCOM 16 Carbine AEG Airsoft Rifle (Black)
[P11B00][02911 / LT-732AB]New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
If you are looking for an airsoft gun that competes with the CYMA AEGs, you should check out E&L , LCT, and the Lancer Tactical Stamp Steel Line!
The CM032 M14 SOCOM is the clone that you've been waiting for. It has it all; looks, performance, reliability and compatibility. The look and feel of the CM032 is is solid, much like the Tokyo Marui and G&G M14. The internals have been completely re-engineered and cleaned up, making it totally compatible with aftermarket upgrade and replacement parts like Systema and Prometheus. The UTG and AGM M14 don't even come close to the CM032 in the way off engineering, performance, and compatibility with parts. The CM032 is equipped with standard SOCOM 16 characteristics like the shortened barrel with compensator, and top rail on the heat shield for accessories like optics. The stock is large enough to house a large 8.4v battery so you can play all day without stopping to recharge. The CM032 is without a doubt the BEST airsoft SOCOM 16 on the market for your money
Specifications:
Manufacturer: Cyma
Model: CM032A
Muzzle Velocity: 330-360 FPS
Magazine Capacity: 400 rds
Color: Black
Package Includes: Gun, Battery, Charger, Magazine, Manual, Sling
Warranty Length: 45 Days
Warranty Handler: Airsoft GI (Warranty Policy)
Features:
- Functioning charging handle
- High quality metal and polymer build
- Re-engineered full metal internals
- Size allows for both indoor and outdoor use
Please Note:
- Disregard the manual in regards to charging the battery. The battery for this gun should be charged 6 hours the first time and 4 hours subsequent times. Make sure to check the battery every hour to insure it is not too hot.
- Scope is NOT included
Airsoft GI Battery Disclaimer:
Airsoft GI is not responsible for batteries that have been damaged as a result of improper operation, storage, misuse or abuse, accident or neglect, such as physical damage resulting from misuse; contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; use of the battery for commercial purposes or subjecting the battery to abnormal usage conditions, or other acts which are not the fault of Airsoft GI. Make sure you understand how your battery should be used and how long it should be charged. If you have any doubt regarding the operation, charging, or storage of your battery and/or charger, ask. A charging battery should not be left unattended and should be picked up periodically while charging to check for overheating. Do not charge batteries near flammable material. For more information regarding batteries please refer to the Frequently Asked Questions or the Airsoft GI Airsoft 101 Guide.
- Specifications
- Manufacturer: CYMA
- Muzzle Velocity: 330-360FPS
- Color: Black
This gun is pretty accurate for semi automatic but after more than 3 shots they start to get a off target. (Mind you I was shooting from a distance from 75-100 feet) To fix this all you need to do is upgrade to a more accurate inner barrel which isn't very hard and it definitely pays off.
Pros:
Durable
High FPS
Good for outdoor battles
Iron sights are accurate and easy to change.
Good weight
Cons:
Can't place a sight on top of the barrel due to rail location
Fully automatic isn't very accurate.
I've had this gun for about 2 years now. This gun has blown away all my expectations and really impressed me with the CYMA brand. I got it on sale for around $110 back then and its been worth every penny. Amazing accuracy and great range. Gun comes with a 8.4 battery, but once you put a 9.6 you really start to see a performance jump. Consistently accurate out to about 175ft bone stock.
Pros:
Great accuracy right out of the box no upgrades needed.
Fake wood looks good and its durable.
Has a nice quiet sound to it...
Great "rifle" feel to it. Something different than a pistol grip on an assault rifle.
Cons:
Fake bolt, while sounding cool, seems like it might be a little prone to breaking.
The fire selector switch seems a little fragile also. Mine is still in place fine, but I am careful with it.
Excellent buy!
Gun shoots well and much more quiet than my other guns, works great on an 11.1 lipo! FPS on mine when i went and played was 350 so i can use it in close quaters at my feild.
Pros:
Cons:
|
Changeable spring?
Can I change the sprin out for a higher power spring to add fps
3204 days ago kyle b
0
0
(I have this same question)
Staff Answer:
The internals should be exchangeable. 3203 days ago 0
0
|
1 answers 1 asked |
|
Rail system
Could the front rails accommodate a red dot sight as well as a lens protector?
3387 days ago Aeddon M
0
0
(I have this same question)
Staff Answer:
It should 3382 days ago 0
0
|
1 answers 1 asked |
|
Rail system
Could the front rails accommodate a red dot sight as well as a lens protector?
3387 days ago Aeddon M
0
0
(I have this same question)
Staff Answer:
It should 3382 days ago 0
0
|
1 answers 1 asked |
|
Recommended Lipo?
What lipo battery would be best to use?
3522 days ago Drizzt I
0
0
(I have this same question)
Staff Answer:
Airsoft GI does not recommend the use of 11.1V LiPo batteries as they may cause excess stress on the internals of this airsoft gun. However, a 7.4V LiPo will offer comparable performance to a 9.6V battery, and use of such is covered under Airsoft GI's warranty. <BR><BR> <a href="http://www.airsoftgi.com/product_info.php?products_id=11915">Tenergy LiPo 7.4V 1000mAh 20C Butterfly Pack (Battery) [Link] </a> 3522 days ago 0
0
|
1 answers 1 asked |
|
Mags | 0 answers 1 asked |
|
inner barrel length?
How long is the inner barrel?
3616 days ago Rodrigo S
0
0
(I have this same question)
I believe 420mm
3079 days ago
Michael L
0
0
|
1 answers 2 asked |
|
BBs | 0 answers 2 asked |
|
Just a silly question
Just for fun i was wondering if this would fit comfortably in the Condor shotgun scabbard.
3698 days ago Joseph L
1
0
(I have this same question)
It might be a little long, considering those scabbards are generally designed for tactical shotguns
2801 days ago
Chris H
0
0
|
1 answers 2 asked |
|
battery
want a better battery help
3705 days ago adrian m
0
0
(I have this same question)
Do some research. Look for higher voltage batteries for power and higher mAh for longevity
3616 days ago
Rodrigo S
0
0
|
1 answers 1 asked |
|
what gearbox ver.?
want to install gears for torque
3747 days ago Dorion H
0
0
(I have this same question)
Staff Answer:
Most airsoft M14's should be a Version 7 gearbox. 3747 days ago 0
0
|
1 answers 1 asked |
|
motor length?
want to install high torque motor
3747 days ago Dorion H
0
0
(I have this same question)
Staff Answer:
Should be a short type 3747 days ago 0
0
|
1 answers 1 asked |
|
how long is the gun?
total length
3759 days ago aeron j
0
0
(I have this same question)
it is 3 feet and 1 inch
3746 days ago
David B
0
0
|
1 answers 1 asked |
|
scope in picture
is that just for looks in the picture or does the gun come with it? just verifying
3759 days ago aeron j
0
0
(I have this same question)
Staff Answer:
Optics are not included 3757 days ago 0
0
|
1 answers 1 asked |
|
Mag trouble😔
I have this and got d-boys mags that won't work i think the feeding thing is to far ahead ideas on fixing it please awenser
3841 days ago Bryson B
0
0
(I have this same question)
Unfortunately, the only mags I have found that work for this model are the Echo 1 and Classic Army M14 mid and hi-cap mags
2798 days ago
Chris H
0
0
|
1 answers 1 asked |
|
would this gun be good in the field too?
i know it says cqb but would it still be good in the field
3861 days ago alex b
0
0
(I have this same question)
Staff Answer:
This gun should be good to use in the field. 3860 days ago 0
0
|
1 answers 1 asked |
|
is there a semi fire mode ?
because, what would a M14 be without a semi fire mode?
3861 days ago alex b
0
0
(I have this same question)
thank you GI Staff
3861 days ago
alex b
0
0
because, what would a M14 be without a semi fire mode?
3861 days ago alex b
0
0
(I have this same question)
Staff Answer:
This gun shoots semi and full auto 3861 days ago 0
0
|
2 answers 1 asked |
|
Thread Specs?
I would like to mount a mock suppressor, but I am unsure if the barrel device that comes on the gun is removeable. If it is, what are the thread specifications?
3952 days ago Gerrit K
0
0
(I have this same question)
Staff Answer:
These particular SOC16's do not come with barrel threads. 3951 days ago 0
1
|
1 answers 1 asked |
Other Great Deals and Accessories:
Select the item from the Drop Down Menu and click add.