Burst Wizard King Kong Super 2 Deans Connector Mosfet
[S04J03][16005]
OUT OF STOCK
Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
The Burst Wizard King Kong Super 2 ( BWKKS2 ) MOSFET for AEG allows the user to easily and nearly seamlessly flip between burst firing mode into pure MOSFET mode. This plug-and-play MOSFET system contains a large amount of features but contains even more programmable features when hardwired to your AEG. With almost every field, thereis some sort of firing limitation, what is more easily and economically accomplished than installing the BWKKS / BWKKS2 into any of your AEGs. Adaptive Smart Resettable Fuse is our proprietary feature that protects your valuable AEG in the event that your gearbox / motor is lockup or wiring short. It will cut off power to the motor in a fraction of a second to prevent any real damages done to the gearbox, motor and wiring regardless of battery types, battery voltage, your AEG power rating and battery draining conditions. Overall, this is a great addition to your AEG to increase the overall function as well as longevity without breaking the bank.
Specifications:
Manufacturer: Burst Wizard King Kong Super 2
Modes: Programmable
Package Includes: One (1) MOSFET System
Features:
Programmable Fire Modes
Pre-Setup ROF Adjustment
Compact Design
- Specifications
- Manufacturer: Burst Wizard
- Color: Black, Red
- Material: Rubber, Silicone, Metal, Plastic
- Package Includes: One (1) MOSFET System
see 7 reviews
| Write a Review
verified buyer
verified buyer
verified buyer
verified buyer
A. LAROSE
|
2014-05-20
Product Information:
This MOSFET unit is great! I've gotten two, but the first one came broken, which was really disappointing, but the second one works great! This has way more features than AirsoftGI advertises, and I don't really see why they wouldn't advertise them.
Pros:
Plug and play, with the option of hardwiring it for extra features. It even comes with everything necessary to hardwire it.
Very easy to adjust how many shots per burst, each burst being between 2 to 9 shots.
Helps to protect trigger contacts, which is very helpful when used with a high voltage battery.
If you hold the trigger on full auto (which would be your burst with this MOSFET) for longer than 0.6 seconds, the gun will begin to fire again in full auto. This helps if you come across a huge crowd of people and need to spray. And 0.6 seconds is a lot longer than you might think. And if you don't like this (it's called "Resume Full-Auto"), you can disable it.
When hardwired, you have the option of pre-cocking (the piston starts halfway back, so the gun will fire immediately after pulling the trigger), sniper mode (you can only shoot once every second), LiPo alarm mode (it detects the voltage of your LiPo and will tell you when it's getting dangerously low), and rate of fire adjustment mode (should be self explanatory). You can also use it to tell you the RoF of your AEG (yeah, that's pretty cool) and set the unit to memorize the amount of shots your mag can make with your burst setting (for example, if your mag can hold 140 rounds and you're using 2-round burst, then you would set it to 70) and have it delay the gun from firing any further until a specified amount of time (this amount of change is changeable); this effectively makes it so that your gun basically stops firing when you're out of ammo, requiring you to reload until you can fire again, just like in real steel.
Cons:
The first one that I bought came broken.
It's hard to plug in as the Deans are a little oddly sized.
It wasn't free.
There's a LOT of instructions, so you'll have to take your time if you want to fully get the best results.
This MOSFET unit is great! I've gotten two, but the first one came broken, which was really disappointing, but the second one works great! This has way more features than AirsoftGI advertises, and I don't really see why they wouldn't advertise them.
Pros:
Plug and play, with the option of hardwiring it for extra features. It even comes with everything necessary to hardwire it.
Very easy to adjust how many shots per burst, each burst being between 2 to 9 shots.
Helps to protect trigger contacts, which is very helpful when used with a high voltage battery.
If you hold the trigger on full auto (which would be your burst with this MOSFET) for longer than 0.6 seconds, the gun will begin to fire again in full auto. This helps if you come across a huge crowd of people and need to spray. And 0.6 seconds is a lot longer than you might think. And if you don't like this (it's called "Resume Full-Auto"), you can disable it.
When hardwired, you have the option of pre-cocking (the piston starts halfway back, so the gun will fire immediately after pulling the trigger), sniper mode (you can only shoot once every second), LiPo alarm mode (it detects the voltage of your LiPo and will tell you when it's getting dangerously low), and rate of fire adjustment mode (should be self explanatory). You can also use it to tell you the RoF of your AEG (yeah, that's pretty cool) and set the unit to memorize the amount of shots your mag can make with your burst setting (for example, if your mag can hold 140 rounds and you're using 2-round burst, then you would set it to 70) and have it delay the gun from firing any further until a specified amount of time (this amount of change is changeable); this effectively makes it so that your gun basically stops firing when you're out of ammo, requiring you to reload until you can fire again, just like in real steel.
Cons:
The first one that I bought came broken.
It's hard to plug in as the Deans are a little oddly sized.
It wasn't free.
There's a LOT of instructions, so you'll have to take your time if you want to fully get the best results.
verified buyer
M. NJAASTAD
|
2015-07-15
Product Information:
very good product and works like a charm. Be very care with plugging it into a battery because my connectors actually became stuck and I ended breaking the solder joint on the mosfet. Once I re soldered a not so bad deans plug on it worked like a charm! I still would definitely recommend this!
Pros:
Well built
Easy to install
A ton of settings!
Small and convenient!
Cons:
My only con is the crappy plug that came with and the fact that I broke a joint just trying to pull it apart from the battery.
very good product and works like a charm. Be very care with plugging it into a battery because my connectors actually became stuck and I ended breaking the solder joint on the mosfet. Once I re soldered a not so bad deans plug on it worked like a charm! I still would definitely recommend this!
Pros:
Well built
Easy to install
A ton of settings!
Small and convenient!
Cons:
My only con is the crappy plug that came with and the fact that I broke a joint just trying to pull it apart from the battery.
verified buyer
F. VEILLEUX
|
2016-07-22
Product Information:
Great overall mosfet out of the box
Pros:
Deans are good
Many settings avalaible
Plug and play
Burst out of the box
Cons:
Mosfet takes place in the stock (I have a vfc hk416)
Great overall mosfet out of the box
Pros:
Deans are good
Many settings avalaible
Plug and play
Burst out of the box
Cons:
Mosfet takes place in the stock (I have a vfc hk416)
|
|
what type of connector for the lancer tactical | 0 answers 1 asked |
|
|
Trigger bypass
Hi ! I would like to know if you can Bypass the trigger with this mosfet because I see the Red wire so can you solder it to your gearbox so no moore electricity will go in the trigger ? Thanks
3886 days ago Francis D
0
0
(I have this same question)
Staff Answer:
You can hard wire it to the trigger, however you cannot "bypass" the trigger 3885 days ago 0
0
|
1 answers 1 asked |
|
|
Burst
Can you disable the burst function?
3911 days ago Remus M
0
0
(I have this same question)
Staff Answer:
Yes, it is possible 3911 days ago 0
0
|
1 answers 1 asked |
|
|
Gear box damage prevention?
If this is hardwired to the gearbox will it prevent damages caused by using an 11.1 lipo? My idea was to turn the settings down keeping the rof at a more realistic rate while utilizing the powerful battery for increased trigger (motor and gear) response. Would this work?
3913 days ago Corin F
0
0
(I have this same question)
Staff Answer:
This will only protect the trigger contacts, not the rest of the parts such as the gears, piston, etc. 3912 days ago 0
0
|
1 answers 1 asked |
|
|
Does this have a low battery alert
Does this stop the discharge rate on a lipo from going too low? Does an alarm sound or does it just stop everything?
3966 days ago Jacob R
0
0
(I have this same question)
Staff Answer:
This has a low power indicator setting for LiPo batteries that has to be set up. 3965 days ago 0
0
|
1 answers 1 asked |
|
|
would this protect my trigger contacts?
I'm doing a high speed setup and I want to put a Mosfet in to protect my trigger contacts
3995 days ago Jacob C
0
0
(I have this same question)
Staff Answer:
It should be able to. 3995 days ago 0
0
|
1 answers 1 asked |
|
|
would it be a good idea to wire a m249 in deans
I am rewiring an m249 and am looking to make it too of the line and rugged
4036 days ago Maher A
0
0
(I have this same question)
Its a good idea for any gun to rewire it to deans connectors. Reason being is that deans are a lot better than tamiya and the ROF and longevity of your battery will be improved
4026 days ago
Randall K
0
0
|
1 answers 1 asked |
|
|
will this fit in a PEQ box
Will this fit in the PEQ box on a VFC PDW or LAncer Tactical full metal PDW with a lipo battery?
4044 days ago Eric S
0
0
(I have this same question)
Staff Answer:
This should fit. 4044 days ago 0
0
|
1 answers 1 asked |
Search Tags: Mosfet Electrical Burst Plug & Play And Easy Installation Adjustable Magazine Delay AEG precocking
