Airsoft GI Desert G4-A2 Silent Death Blowback Version AEG Airsoft Rifle (Tan/Custom)
[06533]
OUT OF STOCK
New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Never before have we built a gun with such a high value per dollar ratio. The base gun is a special Combat Machine Blowback M4 with a crane stock that's wired to the back. The brilliant techs at Airsoft GI have fitted the Officially Licensed Madbull Gemtech T2 Front End Kit and as a result, the final product is a unique CQB carbine with flush look and sturdy front end. We've worked out a special program with Combat Machine to build us a special M4 with a crane stock, sling mount, and the wires to the back, so we can eliminate the need for a PEQ box and keep a clean look. The Combat Machine was carefully chosen for their high quality, reliability and incredible value. We've dropped the G4 straight onto the ground from 8ft and 9ft with no visible damage to the body, this is the strongest plastic receiver on the market. Additionally, with the innovation and imagination from the Airsoft GI technical team we are building some of the highest quality guns that money can buy.
This incredible offer is only available at Airsoft GI. If you were to buy all these parts individually it would cost over $340.00!
- 170 for the base gun
- 135 for the rail kit
- 40 for the crane stock (assuming the gun is already wired for a crane stock)
Specifications:
Manufacturer: Airsoft GI, G&G
Muzzle Velocity: 335-365 fps
Magazine Capacity: 450 rounds
Battery Type: Nunchuck (similar type batteries will also work, call Airsoft GI if you require more clarification)
Package Includes: Gun, High Capacity Magazine
Features:
Special Combat Machine Model Base Gun
Official License Madbull Gemtech T2 Kit
Rear Sling Mount
Crane Stock, wired to rear
450 rounds Magazine
Please Note:
- Vertical Grip and Holosight are not included.
- Battery and Charger not included.
- This product is covered under a 45 days warranty against workmanship and defect, for more details contact Airsoft GI.
- The Flash hider pictured is not the one offered with the gun.
- Specifications
- Manufacturer: Airsoft GI
- Muzzle Velocity: 335-365
- Magazine Capacity: 450 Rds
- Fire Mode: Safe Semi Full
- Color: Tan
- Material: Polymer
- Battery Pack: Not Included
- Package Includes: Gun Magazine Unjamming Rod
- Stock Type: Crane Stock
- Handguard: Madbull T2 Gemtech 7" RAS & Barrel Extension Kit
- Sight: No
- Cylinder Head Type: Polycarbonate
- Cylinder Type: G&G Blowback Cylinder
- Piston Head Type: Polycarbonate
- Piston Type: Polycarbonate
- Air Nozzle Type: M4/M16
- Tappet Plate Type: Ver. 2
- Spring Type: G&G 120
- Spring Guide Type: Ver. 2 G&G Metal Spring Guide
- Bushing Size: 8mm
- Bushing Type: Brass Bushings
- Gear Set Type: G&G Standard Ver. 2
- Switch/Wire Type: M4 Rear Wired
- Selector Plate Type: M4
- Cut Off Lever Type: Ver. 2
- Anti Reverse Latch Type: G&G Blowback Anti-Reversal Latch
- Motor Type: G&G Standard Motor (Long)
- Hop Up Type: Plastic
- Inner Barrel Length: 300mm
- Sector Gear Clip: No
- Fuse: Yes
- MOSFET: No
- Quick Spring Change: No
- External
- Primary Build Material: Polymer
- Internal
- Gear Box: G&G Blowback Gearbox (Ver. 2)
- Options
- Spring Release: Yes
see 15 reviews
| Write a Review
verified buyer
verified buyer
verified buyer
verified buyer
J. GUAJARDO
|
2014-01-06
Product Information:
i bought this gun about 15 months ago, and i have to say its a great gun. Its made of good quality stuff and the internals are great. In the 15 months ive had this ive only experienced to problems,
1. the fake bolt broke off from the main blowback system(although it was partially my fault)
2. This problem started about a week ago, after shooting a few rounds the motor height gets unadjusted and i have to adjust it, but i think getting a new pistol grip.
Pros:
-Lightweight
-Plastic body(could be a con)
-Metal rail system
-Good ROF
-Good FPS
-Good accuracy
Cons:
-the fake bolt broke off from the main blowback system(although it was partially my fault)
-This problem started about a week ago, after shooting a few rounds the motor height gets unadjusted and i have to adjust it, but i think getting a new pistol grip.
i bought this gun about 15 months ago, and i have to say its a great gun. Its made of good quality stuff and the internals are great. In the 15 months ive had this ive only experienced to problems,
1. the fake bolt broke off from the main blowback system(although it was partially my fault)
2. This problem started about a week ago, after shooting a few rounds the motor height gets unadjusted and i have to adjust it, but i think getting a new pistol grip.
Pros:
-Lightweight
-Plastic body(could be a con)
-Metal rail system
-Good ROF
-Good FPS
-Good accuracy
Cons:
-the fake bolt broke off from the main blowback system(although it was partially my fault)
-This problem started about a week ago, after shooting a few rounds the motor height gets unadjusted and i have to adjust it, but i think getting a new pistol grip.
verified buyer
R. HIRSCH
|
2014-07-23
Product Information:
If I could sup up this gun in one word it would be reliable. I have owned this gun for over 2 years now and I thought it was about time to write a review on it. First of all this gun feels solid. Being that the majority of the gun is made of metal it can withstand bumps and drops. Another another thing that makes the gun worth every penny is its fps. 420 is a solid speed to be using in outdoor fields. If you can sneak it past the chrono, anyone hit in a CQB situation will sure to call 'out' if hit by it. The final feature seen in this gun compared to other guns is its accuracy. I had a red dot and a fore-grip sitting at home and after adding then to my gun, I found I could pick it up any day of the week and hit a target 9 out of 10 times. Forget what the other reviews say because if you get a gun that had no malfunctions out of the box, everything said above will hold true.
In summary, this is a solid, dependent, necessary gun for anyone wanting to exceed in airsoft. But remember, the gun is only as good as the one shooting it.
Check out my other review on the Robinson Armament Polymer XCR-C Airsoft Gun.
Pros:
Solid build
Cool suppressor
420 fps w/ .2g
Cons:
None!
If I could sup up this gun in one word it would be reliable. I have owned this gun for over 2 years now and I thought it was about time to write a review on it. First of all this gun feels solid. Being that the majority of the gun is made of metal it can withstand bumps and drops. Another another thing that makes the gun worth every penny is its fps. 420 is a solid speed to be using in outdoor fields. If you can sneak it past the chrono, anyone hit in a CQB situation will sure to call 'out' if hit by it. The final feature seen in this gun compared to other guns is its accuracy. I had a red dot and a fore-grip sitting at home and after adding then to my gun, I found I could pick it up any day of the week and hit a target 9 out of 10 times. Forget what the other reviews say because if you get a gun that had no malfunctions out of the box, everything said above will hold true.
In summary, this is a solid, dependent, necessary gun for anyone wanting to exceed in airsoft. But remember, the gun is only as good as the one shooting it.
Check out my other review on the Robinson Armament Polymer XCR-C Airsoft Gun.
Pros:
Solid build
Cool suppressor
420 fps w/ .2g
Cons:
None!
verified buyer
S. DAMICO
|
2014-08-30
Product Information:
I have had this gun for a few months now. This gun has been great. However let me state that I had Airsoft GI do a lot of additional customization to it before they shipped it out. One $40 labor charge and they did a ton of stuff - added a 120 spring, added a 2 inch outer barrel extension, custom cut a tight-bore Miracle barrel to come right to the end of the suppressor, added a flat hop bucking, added Lonex enhanced gears, new piston head, ported the cylinder, and installed a new pistol grip.
Because its based on the G&G combat machines body this gun is very light weight. A sweet gun, I can easily recommend it.
Pros:
Accurate
Light weight
Cool looking
Functional spring tension release.
Nice snappy trigger
G&G internals
Cons:
Every once in a while when in semi-auto the gun will stop firing. I just need to take out the mag and reinsert it and that usually fixes the problem. Other times I need to switch to full auto for a second and that fixes the issue. I think this might have more to do with me doing a slow, or half trigger pull in semi-auto.
I have had this gun for a few months now. This gun has been great. However let me state that I had Airsoft GI do a lot of additional customization to it before they shipped it out. One $40 labor charge and they did a ton of stuff - added a 120 spring, added a 2 inch outer barrel extension, custom cut a tight-bore Miracle barrel to come right to the end of the suppressor, added a flat hop bucking, added Lonex enhanced gears, new piston head, ported the cylinder, and installed a new pistol grip.
Because its based on the G&G combat machines body this gun is very light weight. A sweet gun, I can easily recommend it.
Pros:
Accurate
Light weight
Cool looking
Functional spring tension release.
Nice snappy trigger
G&G internals
Cons:
Every once in a while when in semi-auto the gun will stop firing. I just need to take out the mag and reinsert it and that usually fixes the problem. Other times I need to switch to full auto for a second and that fixes the issue. I think this might have more to do with me doing a slow, or half trigger pull in semi-auto.
|
|
stock
When will this gun be in stock?
2440 days ago Adam H
0
0
(I have this same question)
Staff Answer:
This is discontinued. We can make one similar for you with CA ENF series guns. Give us a call at 909 869 0671 2440 days ago 0
0
|
1 answers 1 asked |
|
|
Sling
What type of sling mount (if any) is on this gun. If there is not one, is there one I could install?
3036 days ago John E
0
0
(I have this same question)
Staff Answer:
It has sling mounts attached to the rear of the receiver 3033 days ago 0
0
|
1 answers 1 asked |
|
|
Rail Covers
What type of rail covers fit this gun?
3465 days ago Henry L
0
0
(I have this same question)
Staff Answer:
any rail covers 3464 days ago 0
0
|
1 answers 1 asked |
|
|
FUSION MOTOR? | 0 answers 1 asked |
|
|
Does the included suppressor have an orange tip?
Would the gun come with a orange tipped suppressor or would it be like it is shown in the image?
3521 days ago Hunter C
0
0
(I have this same question)
Staff Answer:
Yes, an orange adhesive tape will be placed on the suppressor to meet requirements for an orange tip on the airsoft gun. 3521 days ago 0
0
|
1 answers 1 asked |
|
|
ETA?
And news on when this gun is going to be back in stock?
3523 days ago Cameron M
0
0
(I have this same question)
Staff Answer:
We currently do not have an ETA 3523 days ago 0
0
|
1 answers 1 asked |
|
|
does the gun come with the surpressor
The surpressor in the picture
3532 days ago Chauncey D
0
0
(I have this same question)
Staff Answer:
Yes, the barrel extension pictured is part of the front end kit for this airsoft gun. 3530 days ago 0
0
|
1 answers 1 asked |
|
|
How heavy is it?
How heavy is the whole gun?
3538 days ago Michael C
0
0
(I have this same question)
Maby 7 or 8 lbs
3495 days ago
tim f
0
0
|
1 answers 1 asked |
|
|
Can you get the reciver in metal
Where tigger is
3538 days ago Matthew H
0
0
(I have this same question)
Staff Answer:
No 3537 days ago 0
0
|
1 answers 1 asked |
|
|
Does this gun come with iron sights?
Trying to decide if I need to buy any or not
3538 days ago Cameron M
0
0
(I have this same question)
Staff Answer:
It does not appear to 3537 days ago 0
1
|
1 answers 1 asked |
|
|
suppresor
what type of tread is it? 14mm positive or negative?
3590 days ago Jake L
0
0
(I have this same question)
Staff Answer:
Negative 3590 days ago 1
0
|
1 answers 1 asked |
|
|
would a 1600 nimh tenergy work | 0 answers 1 asked |
|
|
Field/Hop-up Upgrade recommended for outdoor fields
Is it recommended to have it upgraded by Airsoft Gi's professional techs to have this weapon for field use?
3753 days ago Victor T
0
0
(I have this same question)
Staff Answer:
You can have it upgraded, however this is meant to be a CQB gun 3753 days ago 0
0
|
1 answers 1 asked |
|
|
Field/Hop-up upgrade recommended for field play? | 0 answers 1 asked |
|
|
Field/Hop-up upgrade recommended for field play? | 0 answers 1 asked |
|
|
Field/Hop-up upgrade recommended for field? | 0 answers 1 asked |
|
|
Blowback | 0 answers 1 asked |
|
|
Range?
What is the range in feet of this weapon?
3866 days ago Sten C
0
0
(I have this same question)
Staff Answer:
Maximum effective range is about 120ft. 3866 days ago 0
0
|
1 answers 1 asked |
|
|
when will this be back in stock?!?!?!?!?!?!?!
Please please please get this gun back in stock within a month im goin to cqb city in two weeks and ill need a cqb gun
3913 days ago Chris F
1
0
(I have this same question)
Staff Answer:
We are currently waiting on parts for this gun. Meanwhile, please click the "request item" icon near the "out of stock" button to notify the techs that this item is in demand. 3912 days ago 0
0
|
1 answers 2 asked |
|
|
Does it ship with silencer installed or is the flash suppressor installed
Does it ship with the orange tip installed and you have to install the mock suppressor afterwards or is it shipped with the mock suppressor on it? Because one of the images is the info about the orange flash suppressor but this gun doesn't have one according to the pictures and specs so why is this image here?
3919 days ago Mason R
0
0
(I have this same question)
Staff Answer:
This gun should come with the mock suppressor already installed. 3919 days ago 0
0
|
1 answers 1 asked |
|
|
Any idea when this will be back in stock ?
I'm ready to buy just need this to be back on stock
3926 days ago Jesus M
0
0
(I have this same question)
Staff Answer:
We are currently waiting on parts. We don't have an ETA on the return of this gun. 3926 days ago 1
0
|
1 answers 1 asked |
|
|
What is the length of the inner barrel?
I want to change the barrel on mine for outdoor play
3949 days ago David G
0
0
(I have this same question)
Staff Answer:
This gun uses a 300mm inner barrel. 3948 days ago 0
0
|
1 answers 1 asked |
|
|
Could I use a Tenergy LiPo 11.1V 1000mAh 20C Stick (Battery)?
Battery?
3952 days ago Elvis P
0
0
(I have this same question)
Staff Answer:
Airsoft GI reccommends using a 9.6V NiMH or a 7.4v Li-Po. 3950 days ago 0
0
|
1 answers 1 asked |
|
|
Can I use a Tenergy LiPo 11.1V 1000mAh 20C Stick Battery ?
battery!
3953 days ago Elvis P
0
0
(I have this same question)
Staff Answer:
It is possible to use that battery, but not recommended as it will put a large amount of strain on the internals of the gun. 3950 days ago 0
0
|
1 answers 1 asked |
|
|
When is coming back to stock?!?!
I want to buy!!!!!
3957 days ago Elvis P
1
0
(I have this same question)
Staff Answer:
We're currently waiting on parts for the techs to build this custom. 3957 days ago 1
0
|
1 answers 1 asked |
Other Great Deals and Accessories:
Select the item from the Drop Down Menu and click add.
Search Tags: Nylon Fiber Receiver M4 RIS CQB Combat Crane Stock High Capacity Gemtech RAS M4A1 G4 A2 RAS Rail Rails System Polymer Blow Back Rifle Dark Earth Desert Brown Two Tone Toned Two-Toned Two-Tone Gemtech Mock Suppressor Silencer AR15 AR 15 AR-15 Small Maneuve
Related products:
People who bought this item also purchased:
