Action Army Specialized S-Trigger for VSR-10/Bar10
[SI04][09273 / AAC-B01-011]
OUT OF STOCK
Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
The Action Army Specialized "S" Trigger for VSR10 / Bar10 is an absolute must have for the airsoft sniper who demands the utmost accuracy and precision. It releases the tension on the piston with almost zero pressure on the trigger, hence its clever name. It almost feels like the trigger isn't even there. So if you are looking to improve the trigger-pull on your VSR10 / Bar10 airsoft sniper rifle, this is the perfect upgrade for you.
Specifications:
Manufacturer: Action Army
Model: S-Trigger
Size: Fits VSR10 / Bar10 Only
Package Includes: Trigger assembly, piston
Features:
Reduces trigger-pull to almost "zero" pressure
Highly durable construction
Upgraded piston
Please Note:
- Professional installation is recommended. Improper use or installation of upgrade parts are 99% of the time the cause of failures of these items.
- Specifications
- Manufacturer: Action Army
- Color: Black
- Material: Aluminum / Steel
see 5 reviews
| Write a Review
verified buyer
verified buyer
verified buyer
verified buyer
A. OSBORN
|
2013-06-06
Product Information:
I've had this part in my gun for over a year and it is fantastic. My jg bar-10 is completely upgraded and has an m150 spring. It shoots about 530 fps and this part has worked great once broken it. I had to do some sanding to get it to fit the way i want it to, but its pretty easy to do. Overall, i would highly recommend this product.
Pros:
can hold an m150 no problem
made of very good material
piston is very light and good compression
lightest trigger pull you'll ever feel
Cons:
I had to do a bit of sanding on the part that pushes up behind the spring guide for it to fit right (easy to do)
Had to take it apart to screw in the rear screw to the receiver, then assembled it after it was screwed in. (Need an angled allen key or some tech skills)
Sanded down trigger guard to get it to fit
I've had this part in my gun for over a year and it is fantastic. My jg bar-10 is completely upgraded and has an m150 spring. It shoots about 530 fps and this part has worked great once broken it. I had to do some sanding to get it to fit the way i want it to, but its pretty easy to do. Overall, i would highly recommend this product.
Pros:
can hold an m150 no problem
made of very good material
piston is very light and good compression
lightest trigger pull you'll ever feel
Cons:
I had to do a bit of sanding on the part that pushes up behind the spring guide for it to fit right (easy to do)
Had to take it apart to screw in the rear screw to the receiver, then assembled it after it was screwed in. (Need an angled allen key or some tech skills)
Sanded down trigger guard to get it to fit
verified buyer
B. LEE
|
2013-04-28
Product Information:
The thing is pretty decent especially when you consider it is $100 less than the Laylax Z-Trig. However that does come with its drawbacks...
Overall, a great value for $121, which, with a 20.5% discount, equates to sub $100 for a nice trigger mech.
Pros:
-Build quality is of course lesser than the Laylax, but the functionality remains almost identical
-Nylon guide rings are smooth once lubricated
-Steel seems to be properly machined and doesn't show any wear after 1000 rds on a M170 spring.
Cons:
-Internal spring broke, easy replacement if you know where to buy extension springs.
-Disassembly and reassembly is extremely annoying, especially if you don't know where something goes.
-Stock o-ring is not a good fit for the cylinder, as it is too small. Size is #13 from Home Depot or McMaster-Carr.
-Spring guide stopper and piston sear are much too thick for the receiver, a generous amount of sanding and cutting was required to make the bolt pull smooth.
-The rubber pad is scantily glued on, so it fell off after a few hundred rounds. It's not bad, but I replaced it with sorbothane just for good measure.
The thing is pretty decent especially when you consider it is $100 less than the Laylax Z-Trig. However that does come with its drawbacks...
Overall, a great value for $121, which, with a 20.5% discount, equates to sub $100 for a nice trigger mech.
Pros:
-Build quality is of course lesser than the Laylax, but the functionality remains almost identical
-Nylon guide rings are smooth once lubricated
-Steel seems to be properly machined and doesn't show any wear after 1000 rds on a M170 spring.
Cons:
-Internal spring broke, easy replacement if you know where to buy extension springs.
-Disassembly and reassembly is extremely annoying, especially if you don't know where something goes.
-Stock o-ring is not a good fit for the cylinder, as it is too small. Size is #13 from Home Depot or McMaster-Carr.
-Spring guide stopper and piston sear are much too thick for the receiver, a generous amount of sanding and cutting was required to make the bolt pull smooth.
-The rubber pad is scantily glued on, so it fell off after a few hundred rounds. It's not bad, but I replaced it with sorbothane just for good measure.
verified buyer
M. BURKE
|
2016-06-06
Product Information:
I just recieved this along with my brand new Jg vsr 10. Fairly easy install, after properly adjusting the trigger and lubricating the trigger pull was AMAZING.
Pros:
Super sturdy
Nice looking finish
Does not look or feel cheap
Cons:
Expensive
I just recieved this along with my brand new Jg vsr 10. Fairly easy install, after properly adjusting the trigger and lubricating the trigger pull was AMAZING.
Pros:
Super sturdy
Nice looking finish
Does not look or feel cheap
Cons:
Expensive
|
|
Does this fit the classic army m24?
Mine has a Broken trigger box and is in need of a new one
2603 days ago dante a
0
0
(I have this same question)
Staff Answer:
You will need an OEM part for the Gen1 M24 2396 days ago 0
0
|
1 answers 1 asked |
|
|
MB07 Compatibility | 0 answers 3 asked |
|
|
Does this come with the 45 degree sear or a 90? | 0 answers 1 asked |
|
|
Will this fit in a Well MB-07? | 0 answers 2 asked |
|
|
Does it come with a reinforced sear?
It says it included this trigger assembly, does that include a new sear? You can't see the top in the picture.
If it does come with a sear how does it compare to the "Airsoft GI PE Reinforced Sear Set for VSR 10/BAR 10 Series"?
3788 days ago Dan I
0
0
(I have this same question)
Staff Answer:
Yes it does come with the sear. 3788 days ago 1
0
|
1 answers 1 asked |
|
|
Does this trigger fit in a VSR 11?
The description says that the trigger only fits the VSR 10 and BAR 10. However I'm pretty sure I read somewhere that the VSR 10 and VSR 11 are basically the same. So would this trigger fit in a VSR 11?
3825 days ago G. Micah G
0
0
(I have this same question)
Staff Answer:
It is designed for the VSR10/BAR10. it may fit the VSR11, but is not guaranteed 3825 days ago 0
0
|
1 answers 1 asked |
Search Tags: Reinforced Upgrade Internal Kit Sniper DMR VSR 10 VSR10 BAR 10 BAR-10 BAR10
