Action Army 6.03mm Extreme Precision Inner Barrel for VSR 10 (430mm)
[SF27][05844 / AAC-D01-012]
OUT OF STOCK
Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Precision barrels are best described as an inner barrel with a diameter of 6.03mm or less. Precision inner barrels allow for better compression, improved accuracy, and in a few cases increase muzzle velocity. Although precision barrels often require more maintenance and cleaning, they can give an AEG a greater range and improve the overall performance of an airsoft AEG.
Specifications: Manufacturer: Airsoft GI Bore Diameter: 6.03 mm Gun Type: BAR10, VSR10 Barrel Length: 430mm
- Specifications
- Manufacturer: Action Army
- Color: Silver
- Size: 430mm
- Material: Brass, Chrome Coated
- Package Includes: One (1) Precision Inner Barrel
see 5 reviews
| Write a Review
verified buyer
verified buyer
verified buyer
verified buyer
J. JONES
|
2009-12-26
Product Information:
A cheap tightbore that has a hugely low price
It wont change your groupings, but the bbs will fly quite a bit farther. Better than stock barrel, even if it is wider.
A cheap alterinative to a tightbore barrel for the less serious sniper (such as the ones that only deal with lpegs or mpegs, or plays with his friends, not at competitive events).
Pros:
It adds a lot of range
amazing price
Cons:
even with improved range, grouping don't change
wider inner diamater than stock barrel (mesured, a tube will go through easily & smoothly it that is too thick to fit in stock barrel)
A cheap tightbore that has a hugely low price
It wont change your groupings, but the bbs will fly quite a bit farther. Better than stock barrel, even if it is wider.
A cheap alterinative to a tightbore barrel for the less serious sniper (such as the ones that only deal with lpegs or mpegs, or plays with his friends, not at competitive events).
Pros:
It adds a lot of range
amazing price
Cons:
even with improved range, grouping don't change
wider inner diamater than stock barrel (mesured, a tube will go through easily & smoothly it that is too thick to fit in stock barrel)
verified buyer
A. TOMKINS
|
2010-07-03
Product Information:
This barrel was finished well, except for the rear part where the barrel enters and receives hop up. It was badly finished and actually CUT my bbs as they would fly throw the barrel. Absolutely killed my mediocre groupings on my VSR 10 clone until I ground the barrel 'window' so it wouldn't slice the bbs up. Even then, it was a rather wide barrel and I found it didn't fit the kind arms hop up rubber I had purchased although that hop up rubber was rather poor quality anyway.
*Note: THIS IS MADE FOR THE VSR 10 FULL LENGTH NOT THE G-SPEC! YOU WILL HAVE TO COVER IT WITH THE SUPPRESSOR FOR G-SPECs!
Pros:
-Cheap
-Finished well except for the rear
-Tighter bore (if that's what you're looking for)
-Stainless Steel (not cheap, flimsy aluminum)
Cons:
-Poorly cut on the rear
-Wider than most barrels
This barrel was finished well, except for the rear part where the barrel enters and receives hop up. It was badly finished and actually CUT my bbs as they would fly throw the barrel. Absolutely killed my mediocre groupings on my VSR 10 clone until I ground the barrel 'window' so it wouldn't slice the bbs up. Even then, it was a rather wide barrel and I found it didn't fit the kind arms hop up rubber I had purchased although that hop up rubber was rather poor quality anyway.
*Note: THIS IS MADE FOR THE VSR 10 FULL LENGTH NOT THE G-SPEC! YOU WILL HAVE TO COVER IT WITH THE SUPPRESSOR FOR G-SPECs!
Pros:
-Cheap
-Finished well except for the rear
-Tighter bore (if that's what you're looking for)
-Stainless Steel (not cheap, flimsy aluminum)
Cons:
-Poorly cut on the rear
-Wider than most barrels
verified buyer
B. PFLEDERER
|
2010-05-18
Product Information:
This tightbore fits flawlessly in a BAR 10. At a range of 150ft the groupings were all within one foot of the target. I immediately saw an increase in range and accuracy after this was barrel was installed. The BB's fly straighter for a much longer time, and possibly an increase in velocity due to a tighter compression in the barrel. I have had no problems with this barrel, and would recommend this to anyone trying to upgrade their VSR 10 or BAR 10. It's definitely a good bang for your buck.
*Note that this barrel length is NOT MADE for the G-Spec.*
Pros:
Noticeable increase in accuracy and range
Notable increase in velocity
The price is right
Cons:
None
This tightbore fits flawlessly in a BAR 10. At a range of 150ft the groupings were all within one foot of the target. I immediately saw an increase in range and accuracy after this was barrel was installed. The BB's fly straighter for a much longer time, and possibly an increase in velocity due to a tighter compression in the barrel. I have had no problems with this barrel, and would recommend this to anyone trying to upgrade their VSR 10 or BAR 10. It's definitely a good bang for your buck.
*Note that this barrel length is NOT MADE for the G-Spec.*
Pros:
Noticeable increase in accuracy and range
Notable increase in velocity
The price is right
Cons:
None
|
|
Stock?
When will this be back in stock?
3027 days ago Brandon H
0
0
(I have this same question)
Staff Answer:
We currently have no ETA 3027 days ago 0
0
|
1 answers 1 asked |
|
|
will it fit
I want to put a longer barrel into my elite force m4 cqb and I was wondering if I would be able to put this in it.
3756 days ago Garret G
0
0
(I have this same question)
Staff Answer:
No, as it is for a VSR10 3755 days ago 0
0
|
1 answers 1 asked |
Search Tags: Bolt Action Accuracy BAR 10 JG Tight Bore Tightbore VSR 10 VSR10
