A&K GR300 Short M4 Carbine AEG Airsoft Rifle (Black)
[P11B00][04801 / IU-M300-NB]New to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Description:
The new A&K G300 takes M4 styling to a whole new level. The G300 features a unique front assembly and hand guard. In addition to that, the folding stock and ergonomic pistol grip are features rarely seen on most M4s. The one piece metal barrel can be fitted with the included Phantom style flash hider, that's just one of the many subtle differences that make this AEG so good looking. The GR-300 comes with removable front and rear iron sights, as well as 2 QD sling swivel mounts. The unique circular hand guard slides forward revealing the battery compartment.
Specifications:
Manufacturer: A&K
Muzzle Velocity: 390-400 FPS
Magazine Capacity: 450 rounds (high cap)
Package Includes: Gun, magazine, 2x QD sling swivels, cleaning rod.
Features:
- Side Folding Stock
- Removable Rear Sight
- Ergonomic Pistol Grip
- Full Metal Receiver
- 450 Round Hi-Cap M16 Magazine
Please Note:
- Product does NOT include Red Dot
- Product does NOT include Battery or Charger
- Specifications
- Manufacturer: A&K
- Muzzle Velocity: 390-400FPS
Got this from santas sack mystery box. Upon opening wasnt very impressed with packaging. Literally a thin cardboard top that slid over a Styrofoam box, then again to save on cost I can see this. Came with rod, screwdriver, 450 rnd hicap, and 2 qd mounts. I havnt seen many guns come with sling mounts (especially at this price point). While it lacks a few minor features compared with other products around the price range I still think this is high quality for its price point and being full metal. The 8.4v is good enough for this but would of liked to see the front guard be a little bigger bc its hard to get the battery to fit. Also dont like how the guard slides off the front. I would of rathered a 2 piece system or something. Onto performance ive ran 2 hi caps and 2 elite force mid caps through this so far. With hop up adjusted all the way it has better range and accuracy then my CA scar L. This gun also weighs significantly less than my scar which is polymer not full metal like this g300. The stocm is very stury and nice. In its folded form the butt end works nice as a grip when wrapping around that and the magwell. Sights could have been better but theyll be upgraded later anyway. Very nice gun for its price point.
Pros:
Cheap
Metal
Very good distance and accuracy out of the box
Pretty light for a metal gun (pot metal vs steel and aluminum)
Comes with battery and few features not seen on similar priced guns.
Snappy and crisp selector switch (much better thsn my scar)
Solid folding stock
Comes with QD mounts
Comfy grip
Cons:
Front guards design
Minimal battery space
Fairly slow rof
Stock sights arent that great
Packaging (saves overall cost so could be a pro)
The A&K full metal G300 AEG is a great gun it is a really great gun. With a 9.6v it is a beast it is good for field play it is to powerful for CQB. But the battery holder it is kinda weird like I had to look up how to open it but I have to wrap the battery around the barrel and sometimes I need to repositions it so the battery compartment can fit snug. The sling mounts are weird I can't put a sling on it because there are 4 ok the front 2 on each side of the battery compartment and 1 one the left side where the stock meets the body so for y'all right handed shooters it's going to suck if you want a sling on your gun. But the iron sights are kinda weird but y'all can manage but the back iron sight was placed to far upward on the limited rail space you have. The stupid thing it the the front iron sight hex screw are stripped and the hex screw for the flash hider is stripped also and the gun came like that I didn't strip the screws so I can't put a scope on my gun because I can't take the front iron off and I can't take the orange flash hider off to put and like a mock suppressor on it.
Pros:
It is pretty powerful so when I shoot someone they will call their hits
- the full metal feel it awesome
-the trigger response is amazing
-
Cons:
- the front iron sights hex screws came stripped
- the orange flash hider hex screw came stripped
- places where you place your sling mounts are weird
- the stock I different
Now i got this gun for the sole perpose of turning it into a replica of a ar rifle from metal gear solid V i later realized how similar it already was. this gun was beautifully built with some beautiful design work done to it. i loved this thing since i got it. the handgaurd the stock the upper reciever and even the grip . nothing but the lower reciever is the same as a normal m4. the LR300 is one of my favorite looking guns on the market and is even better looking when i added a supressor which i used to hide a longer inner barrel.
Pros:
amazing design with amazing internals,
you will stand out on the airsoft field for your different choice in ar rifles
Cons:
for a cqb sized gun it shoots 400 out of the box. but i went had the fields tech downgrade it and went in the 2nd game of the day
|
Mags
Takes M4 mags right?
2958 days ago Russell D
0
0
(I have this same question)
Staff Answer:
Most M4 AEG magazines should be compatible. 2389 days ago 0
0
|
1 answers 1 asked |
|
battery
could i fit an 11.1 lipo
3082 days ago Cj B
0
0
(I have this same question)
Staff Answer:
Most likely only a tri cell 3079 days ago 0
0
|
1 answers 1 asked |
|
Threads?
What are the threads in this gun?
3790 days ago Alton J
1
0
(I have this same question)
Staff Answer:
They should be 14mm CCW threads 3790 days ago 0
0
|
1 answers 1 asked |
|
What kind of battery will this fit?
Crane stock, mini, etc.
3807 days ago Alex H
0
0
(I have this same question)
Staff Answer:
9.6v 1600 mAh crane stock type battery 3804 days ago 0
0
|
1 answers 1 asked |
|
What ris systems can I put on the foregrips? (Links would be very helpful)
3811 days ago Alex H
0
0
(I have this same question)
Staff Answer:
There are currently no rail systems for this gun in particular 3810 days ago 0
0
|
1 answers 1 asked |
|
Can you put a m4 stock on this
I want to know if you can put a Leapers m4 le 6 position stock on this
3850 days ago Kieran M
0
0
(I have this same question)
Staff Answer:
No, it is not possible without heavy modification (such as welding) 3849 days ago 0
0
|
1 answers 1 asked |
Other Great Deals and Accessories:
Select the item from the Drop Down Menu and click add.