Action Army Reinforced Piston for VSR 10/BAR 10
[U00A05][05709 / AAC-B01-004]
Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Description:
The Airsoft GI PE Reinforced Piston for VSR10 / Bar10 Series is a high quality, high value, alternative to high priced Japanese upgrade parts that do the same exact thing! This piston is precision machined and polished smooth for the best possible air flow through the gun, resulting in better efficiency. Why pay more for the same result. Airsoft GI has always provided great value through our products, and great customer service through our staff, and we're not going to stop! View the chart below to see how the Airsoft GI PE parts perform.
Note: Does not include spring, spring guide, cylinder kit, sear set, hop up bucking, barrel, or threaded barrel adapter.
Specifications:
Manufacturer: Airsoft GI
Design: TM VSR-10 (Including G-Spec), JG BAR-10 (Including G-Spec), HFC VSR-11
| ASGI PE Parts | JG BAR-10/ TM VSR-10 | HFC VSR-11 | AGM MP001 |
| M170 Spring | 570-600 FPS* | 490-510 FPS* | N/A |
| Trigger Sear Modification | Yes | Yes | Yes (Only trigger parts will work with this model) |
*FPS Readings were made with Airsoft GI PE Piston, Spring Guide, and Sears.
- Specifications
- Manufacturer: Action Army
- Color: Orange
- Material: Aluminum
- Package Includes: One (1) Piston
verified buyer
just received this piston today. I was hesitant whether or not to get it mainly because i have a uk arms m24. First off right out of the box the piston is very well made and is very sturdy. For those people with uk arms m24 this will work with some modifications with a dremel. you just have to shave down the plastic parts slightly and the metal back part a little just keep shaving it down till it works smooth. all in all with modifications this piston will work with the uk arms m24.
Pros:
Light weight
sturdy
heavy duty
tough
cheap
only one that will work with uk arms m24 with modifications
Cons:
have to modify for m24
back of piston is screwed on not a big issue just something to keep an eye on
slightly shorter than stock piston
I have used this piston for about 9 months and it is OK. I used this in my backup bar-10. FPS consistency - with a seasoned spring - gives +/- 3 fps deviation. Problem is that the back metal plate tends to scrape the top of the cylinder inside and gives a much hard bolt push compared to the stock piston. However, I'd still recommend using a 90 degree trigger system.
Pros:
FPS consistency
+15-20 FPS increase compared to stock
Action Army brand
Really good air seal
Cons:
Harder bolt push
Can slam fire if trigger assembly is not sitting properly
verified buyer
I ordered this piston for my JG Bar 10 upgrade platform and was extremely impressed with the quality and performance of this inexpensive essential part. All I had to do was spray silicon oil on the friction points and it shot with almost a vacuum tight seal with every pull of the trigger. MUST PURCHASE.
Pros:
~Seal is perfect.
~Fits the spring along with the spring guide (stock and upgraded) very well.
~No modifications are required before use.
Cons:
~Has a loose O-ring at the top that can be damaged if you are not careful when shoving it into the cylinder.
~Requires oil to avoid jams.
~Does not have an alignment pin like the stock piston (however this is me being picky.)
|
|
mb03
Will it fit the mb03 sniper rifle
3647 days ago preston g
0
0
(I have this same question)
Staff Answer:
No 3645 days ago 0
0
|
1 answers 1 asked |
|
|
I.D. & O.D. mm specifications | 0 answers 2 asked |
|
|
willie work for the m28
is this piston compatible with the echo 1 m28 stoke trigger set up
3838 days ago Billy p
0
0
(I have this same question)
Staff Answer:
Most likely not 3837 days ago 0
0
|
1 answers 1 asked |
|
|
45 or 90 degree?
I have a 90 trigger box
3845 days ago Wyatt J
0
0
(I have this same question)
45
3733 days ago
austin k
0
0
|
1 answers 2 asked |
