Systema Area 1000 Polycarbonate Piston Head (Black)
[X07H07][00679 / A1000DPH]
OUT OF STOCK
Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Description:
The Area 1000 Polycarb piston head is a great upgrade that will increase the efficiency of airflow through the cylinder. This piston head has ports on the front to push out the o-ring as it moves forwards, this ensures that all of the air in the cylinder is being pushed out to propel the BB.
Please Note:
- Professional installation is recommended. Improper use or installation of upgrade parts are 99% of the time the cause of failures of these items.
- Specifications
- Manufacturer: Systema
- Color: Black
- Material: Polycarbonate
- Package Includes: One (1) Piston Head
see 5 reviews
| Write a Review
verified buyer
N. KIM
|
2009-01-30
Product Information:
One of the best and most recommended piston head, just need to switch out the oring there known to be on the thin side. These are the exact same piston heads as the systema duracon except it has no bearings which isnt really needed if you have a bearing spring guide.
Pros:
Same as duracon
Cons:
Need different oring
One of the best and most recommended piston head, just need to switch out the oring there known to be on the thin side. These are the exact same piston heads as the systema duracon except it has no bearings which isnt really needed if you have a bearing spring guide.
Pros:
Same as duracon
Cons:
Need different oring
M. STONE
|
2009-07-03
Product Information:
Good head, high quality, only had one issue with it with in over 5000. the screw that i used to secure it to the piston worked its way out, and it got stuck in the cylinder, luckily it didnt break any thing else. I just replaced the screw and a lil bit of lock-tight. I am using a hi-speed setup, w/m120. GReat piston head.
Pros:
Light
durable
absorbs some impact
Cons:
needs lock-tight for some screws
Good head, high quality, only had one issue with it with in over 5000. the screw that i used to secure it to the piston worked its way out, and it got stuck in the cylinder, luckily it didnt break any thing else. I just replaced the screw and a lil bit of lock-tight. I am using a hi-speed setup, w/m120. GReat piston head.
Pros:
Light
durable
absorbs some impact
Cons:
needs lock-tight for some screws
verified buyer
M. MILLER
|
2009-09-07
Product Information:
I had a similar experience as M. STONE, however, when the screw worked it's way out it damaged the piston head in the process. I ended up replacing the screw/washer altogether with a screw that was able to make use of the threads in the piston head.
Pros:
Cheap
Light
Sturdy
Cons:
Included screw/washer are dangerous, replace before installation. You may be able to get away with locktite but it's better to just scrap them right off
I had a similar experience as M. STONE, however, when the screw worked it's way out it damaged the piston head in the process. I ended up replacing the screw/washer altogether with a screw that was able to make use of the threads in the piston head.
Pros:
Cheap
Light
Sturdy
Cons:
Included screw/washer are dangerous, replace before installation. You may be able to get away with locktite but it's better to just scrap them right off
Search Tags: Tokyo Marui ICS JG SRC Cyma Echo1 VFC G&P AGM King arms G&G Upgrade
