Modify Baton Ryusoku Flat Hop Up Bucking (Hard)
[SI04 / O00E06][11712 / MOD HB BATON HARD / GB-05-63]
ADD TO CART
Free Shipping for orders over $179 No Coupon neededNew to airsoft? Here are some safety tips for airsoft guns that we recommend following.
Modify parts have always been extremely high quality and consistent in both construction and performance, and their latest Ryusoku Hop Up bucking is no different. This model has a 55 to 60 soft degree designed to work well with .25g BBs. With this bucking, Modify also achieved an excellent air seal which will benefit both your gun's FPS and consistency. Modify has included a Flat Hop Up Nub for increased stabilization of the trajectory. To coincide with this new feature, Modify has removed the hop up lug on the inside. Due to the high grade construction of the Modify bucking, it is highly tear and abrasion resistant and will stand up to most velocities. If you are looking to increase performance on you AEG, look no further. Little to no modification is needed when installing this bucking.
Specifications :
Manufacturer: Modify
Model: Baton Ryusoku Hop Up Bucking ( Hard )
Hardness: 55-60 Degree
Package Includes: Hop Up Bucking, Flat Spacer
Features:
- Flat Nub
- Designed for 0.25g or above heavier BBs
- Improved distance and accuracy
- Excellent extreme temperature properties
- Improved air seal
- Superior tear resistance
- Specifications
- Manufacturer: Modify
- Color: Black
- Material: Rubber
- Package Includes: Hop Up Bucking, Flat Spacer
see 10 reviews
| Write a Review
verified buyer
verified buyer
verified buyer
M. STANTON
|
2014-07-12
Product Information:
the flat hop bucking has impressed me alot and is now installed in three guns i have. i definitely recommend it.
Pros:
comes with both the bucking and the flat hop nub
noticeable difference in both the gun's range and accuracy
not super easy to tear the bucking
Cons:
non that i can think of just be sure that it is properly seated when reassembling
the flat hop bucking has impressed me alot and is now installed in three guns i have. i definitely recommend it.
Pros:
comes with both the bucking and the flat hop nub
noticeable difference in both the gun's range and accuracy
not super easy to tear the bucking
Cons:
non that i can think of just be sure that it is properly seated when reassembling
verified buyer
D. MONROE
|
2016-04-08
Product Information:
I recommend getting this. its a cheap upgrade to improve the accuracy of your gun. works very well and provides a very straight hop.
Pros:
Accurate
good quality
easy to install if you know how to take apart the hop up
Cons:
the nub can be hard to install but not impossible
I recommend getting this. its a cheap upgrade to improve the accuracy of your gun. works very well and provides a very straight hop.
Pros:
Accurate
good quality
easy to install if you know how to take apart the hop up
Cons:
the nub can be hard to install but not impossible
A. YEE
|
2018-09-08
Product Information:
It is good provides great backspin, did not work in a G&G rotary hop up. For use with non rotary hop up units. Accuracy is consistent, and good. I had to use this in a SHS non rotary hop up. With about 6 o-ring spacers.
Pros:
Easy to install
Rubber is tough
Accuracy is consistent
Great backspin
Cons:
DoesnÂ’t work with rotary hop up units
It is good provides great backspin, did not work in a G&G rotary hop up. For use with non rotary hop up units. Accuracy is consistent, and good. I had to use this in a SHS non rotary hop up. With about 6 o-ring spacers.
Pros:
Easy to install
Rubber is tough
Accuracy is consistent
Great backspin
Cons:
DoesnÂ’t work with rotary hop up units
|
|
will this work with a kwa sr10 in pair with a miracle barrel?
thanks
3413 days ago Owen H
0
0
(I have this same question)
Staff Answer:
Yes 3404 days ago 0
0
|
1 answers 1 asked |
|
|
Pro win hop up
Compatible with The pro win hop up?
3527 days ago Andreas Pedersen M
0
0
(I have this same question)
Staff Answer:
Yes 3527 days ago 0
0
|
1 answers 1 asked |
|
|
Compatable with an m4 madbull hop up?
Mad bull?
3640 days ago James B
0
0
(I have this same question)
Staff Answer:
It should be 3638 days ago 0
0
|
1 answers 1 asked |
|
|
compatibility of a gr16
would this hop up bucking fit in a g&g m16 electric blowback.
3705 days ago Max K
0
0
(I have this same question)
Staff Answer:
It should, but you will likely want the softer gray bucking 3704 days ago 0
0
|
1 answers 1 asked |
|
|
340-360 FPS w/ .30 | 0 answers 1 asked |
|
|
Will this work with a VSR10 clone?
I have the Well MB07.
3729 days ago Joseph T
0
0
(I have this same question)
Staff Answer:
No it will not work 3726 days ago 0
0
|
1 answers 1 asked |
|
|
September 8
Will this work good for a ares s-class M4A1 with a miracle barrel
3754 days ago Mason W
0
0
(I have this same question)
Staff Answer:
You will most likely want the gray one. 3754 days ago 0
0
|
1 answers 1 asked |
|
|
Does the bucking work with an H-nub?
The gun I bought this for has a hop-up arm that's molded into the shape of an H-nub, so I can't use the flat nub that comes with this until I get a new hop up unit. Will the H-nub shape arm still work with the bucking, since the bucking has no bump inside it?
3774 days ago Daniel C
0
0
(I have this same question)
Staff Answer:
It should 3774 days ago 0
0
|
1 answers 1 asked |
|
|
Can this be used in a spring gun
Can this bucking be used in a spring sniper rifle with a magic box miracle barrel?
3776 days ago chad H
0
0
(I have this same question)
Staff Answer:
No 3775 days ago 0
0
|
1 answers 1 asked |
|
|
What is the difference between this and a r-hop? | 0 answers 1 asked |
|
|
Kwa sr10
Will this work in a stock kwa sr10?
3801 days ago Spencer B
0
0
(I have this same question)
Staff Answer:
Yes if installed properly. 3801 days ago 1
0
|
1 answers 1 asked |
|
|
Installation
Will ASGI's tech department install this for me? Thanks
3813 days ago Andrew H
0
0
(I have this same question)
Staff Answer:
They can. 3813 days ago 0
0
|
1 answers 1 asked |
|
|
Installation vid? | 0 answers 2 asked |
|
|
what inner barrel should i buy in conjunction with bucking?
what barrel should i use with this bucking. I have a g&g raider-L. And i was thinking of buying this and a barrel. Is the miracle barrel an overkill? Will i get similar results with a cheaper barrel lets say a G&G 6.04mm inner barrel. Since the highest weight bb i will be using is .28g and my fps is like 360.
3854 days ago Paul S
0
0
(I have this same question)
Staff Answer:
A miracle barrel works well with this style of hop up 3852 days ago 0
1
|
1 answers 1 asked |
|
|
should i go with this or soft version?
should i go with this or soft version with a gun shooting 350 fps?
3866 days ago mary k
0
0
(I have this same question)
Staff Answer:
You will most likely get better results with the softer bucking 3865 days ago 0
1
|
1 answers 1 asked |
|
|
will it work with the kwa br16
they say the kwa m16 needs a kwa bucking only
3866 days ago michael l
0
0
(I have this same question)
Staff Answer:
It should work with that gun 3865 days ago 1
0
|
1 answers 1 asked |
|
|
Will the Flat Hop Nub fit in KWA SR7? | 0 answers 1 asked |
|
|
I am having this installed in my ak but it shoots under 400
I purchased this then I was reading online that if I put a hard bucking in a gun shooting around 350 I might get some major inconsistencies. Is this true? I downgraded the gun to an m100 but I have really good compression. Not sure on the fps.
3900 days ago chris s
0
0
(I have this same question)
Staff Answer:
This will work perfectly fine with your AK at that velocity. 3899 days ago 0
0
|
1 answers 1 asked |
|
|
gas
Does this work for gas guns?
3913 days ago Jonny M
0
0
(I have this same question)
Staff Answer:
It does not. This is for AEG's. 3913 days ago 1
0
|
1 answers 1 asked |
|
|
what are the differances between the (hard and soft ) flat hop
I don't know the differences
3929 days ago Martin S
0
0
(I have this same question)
Staff Answer:
The soft buckings are designed for FPS builds below 400 FPS, the harder buckings are designed for FPS builds above 400. 3928 days ago 0
1
|
1 answers 1 asked |
|
|
Would this be a good fit for the FMG4 series? | 0 answers 5 asked |
|
|
I have a 350 fps gun. Should i get a hard or soft flat hop?
My gun is a stock g&g gr4 g26. I plan on Getting this and a 6.03mm barrel. I use 0.2g bbs and i am not sure if i should get the hard or soft flat hop for my gun
3971 days ago AnnaMaria F
0
0
(I have this same question)
Staff Answer:
You will first want to start using .25g for this flat hop bucking. At 350 fps, both should work fine, but we recommend the soft bucking for ~350 fps. 3970 days ago 0
0
|
1 answers 1 asked |
|
|
do you have to take apart your gear box to instal this?
i want to improve my gun, but I'm clueless
3978 days ago michael c
0
0
(I have this same question)
Staff Answer:
No, but you may need to disassemble your hop up unit to get the flat nub seated properly, 3977 days ago 1
0
|
1 answers 1 asked |
|
|
does the flat spacer go where the nub usually goes
i want it
3979 days ago johnny c
0
0
(I have this same question)
Staff Answer:
Yes, that flat spacer will replace the nub in your hop up unit. 3978 days ago 1
0
|
1 answers 1 asked |
Search Tags: Tokyo Marui JG SRC Echo1 VFC G&P AGM King arms Systema G&G upgrade Range Accuracy Firm Compression
